=> "/opt/tools/bin/bmake" ["-C", "/data/jenkins/workspace/pkgsrc-trunk-tools/devel/binutils", "all", "BATCH=1", "DEPENDS_TARGET=/nonexistent"] ===> Building for binutils-2.47 gmake[1]: Entering directory '/tmp/work/devel/binutils/work/binutils-2.47' gmake[1]: Nothing to be done for 'all-target'. Configuring in ./libiberty Configuring in ./gas Configuring in ./zlib Configuring in ./libsframe Configuring in ./etc Configuring in ./binutils Configuring in ./gprof configure: creating cache ./config.cache checking whether to enable maintainer-specific portions of Makefiles... no checking for makeinfo... /tmp/work/devel/binutils/work/binutils-2.47/missing makeinfo --split-size=5000000 configure: WARNING: *** Makeinfo is missing. Info documentation will not be built. checking for perl... perl configure: creating cache ./config.cache configure: creating cache ./config.cache configure: creating cache ./config.cache checking whether to enable maintainer-specific portions of Makefiles... no checking for a BSD-compatible install... /opt/tools/bin/bsdinstall -c -o pbuild -g pbuild configure: creating cache ./config.cache checking whether build environment is sane... configure: creating cache ./config.cache checking build system type... configure: creating cache ./config.cache yes checking build system type... checking build system type... checking build system type... checking build system type... x86_64-sun-solaris2.11 checking host system type... x86_64-sun-solaris2.11 checking host system type... checking build system type... checking for a thread-safe mkdir -p... x86_64-sun-solaris2.11 checking host system type... x86_64-sun-solaris2.11 checking host system type... x86_64-sun-solaris2.11 checking host system type... x86_64-sun-solaris2.11 ./../install-sh -c -d checking target system type... checking for gawk... /usr/bin/nawk checking whether /opt/tools/bin/gmake sets $(MAKE)... x86_64-sun-solaris2.11 checking host system type... x86_64-sun-solaris2.11 checking target system type... x86_64-sun-solaris2.11 checking for x86_64-sun-solaris2.11-ar... ar checking for x86_64-sun-solaris2.11-ranlib... ranlib checking whether to install libiberty headers and static library... no configure: target_header_dir = checking for x86_64-sun-solaris2.11-gcc... gcc x86_64-sun-solaris2.11 checking target system type... x86_64-sun-solaris2.11 checking target system type... x86_64-sun-solaris2.11 checking target system type... x86_64-sun-solaris2.11 checking for a BSD-compatible install... /opt/tools/bin/bsdinstall -c -o pbuild -g pbuild checking whether build environment is sane... x86_64-sun-solaris2.11 checking for a BSD-compatible install... x86_64-sun-solaris2.11 /opt/tools/bin/bsdinstall -c -o pbuild -g pbuild checking whether build environment is sane... checking for x86_64-sun-solaris2.11-gcc... gcc x86_64-sun-solaris2.11 checking for a BSD-compatible install... /opt/tools/bin/bsdinstall -c -o pbuild -g pbuild checking whether build environment is sane... yes x86_64-sun-solaris2.11 yes checking for a BSD-compatible install... /opt/tools/bin/bsdinstall -c -o pbuild -g pbuild yes checking whether build environment is sane... yes yes checking whether /opt/tools/bin/gmake supports nested variables... checking for a thread-safe mkdir -p... checking for a thread-safe mkdir -p... yes checking for a thread-safe mkdir -p... checking for a thread-safe mkdir -p... ./../install-sh -c -d checking for gawk... /usr/bin/nawk checking whether /opt/tools/bin/gmake sets $(MAKE)... ../install-sh -c -d checking for gawk... /usr/bin/nawk checking whether /opt/tools/bin/gmake sets $(MAKE)... checking whether /opt/tools/bin/gmake supports nested variables... ./../install-sh -c -d (cached) yes ./../install-sh -c -d checking for gawk... checking for gawk... /usr/bin/nawk /usr/bin/nawk checking whether /opt/tools/bin/gmake sets $(MAKE)... checking whether /opt/tools/bin/gmake sets $(MAKE)... checking whether the C compiler works... yes yes yes checking whether /opt/tools/bin/gmake supports nested variables... checking whether /opt/tools/bin/gmake supports nested variables... yes yes yes checking whether /opt/tools/bin/gmake supports nested variables... checking whether /opt/tools/bin/gmake supports nested variables... configure: updating cache ./config.cache yes yes checking whether the C compiler works... checking that generated files are newer than configure... checking whether to enable maintainer-specific portions of Makefiles... no checking whether /opt/tools/bin/gmake supports nested variables... (cached) checking for x86_64-sun-solaris2.11-gcc... gcc yes checking for x86_64-sun-solaris2.11-gcc... gcc checking whether /opt/tools/bin/gmake supports nested variables... (cached) yes checking for x86_64-sun-solaris2.11-gcc... gcc yes checking for C compiler default output file name... a.out checking whether /opt/tools/bin/gmake supports nested variables... (cached) yes checking for suffix of executables... checking for x86_64-sun-solaris2.11-gcc... gcc yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether the C compiler works... checking whether the C compiler works... checking whether we are cross compiling... checking whether the C compiler works... checking whether we are cross compiling... yes checking for C compiler default output file name... a.out checking whether the C compiler works... checking for suffix of executables... yes checking for C compiler default output file name... a.out checking for suffix of executables... no yes checking for C compiler default output file name... a.out checking for suffix of object files... checking for suffix of executables... no checking for suffix of object files... yes checking for C compiler default output file name... a.out checking for suffix of executables... o checking whether we are using the GNU C compiler... checking whether we are cross compiling... checking whether we are cross compiling... checking whether we are cross compiling... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... checking whether we are cross compiling... no checking for suffix of object files... no no checking for suffix of object files... checking for suffix of object files... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... o checking whether we are using the GNU C compiler... o checking whether we are using the GNU C compiler... o checking whether we are using the GNU C compiler... no checking for suffix of object files... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether gcc accepts -g... yes checking whether gcc accepts -g... yes checking whether gcc accepts -g... o checking whether we are using the GNU C compiler... none needed checking how to run the C preprocessor... cpp yes checking for gcc option to accept ISO C89... yes yes checking for gcc option to accept ISO C89... checking for gcc option to accept ISO C89... yes checking whether gcc accepts -g... yes checking how to run the C preprocessor... cpp none needed checking whether gcc understands -c and -o together... checking for grep that handles long lines and -e... none needed checking whether gcc understands -c and -o together... none needed checking whether gcc understands -c and -o together... yes checking for gcc option to accept ISO C89... checking for grep that handles long lines and -e... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by /opt/tools/bin/gmake... yes checking for style of include used by /opt/tools/bin/gmake... yes GNU checking for style of include used by /opt/tools/bin/gmake... checking dependency style of gcc... GNU checking dependency style of gcc... GNU checking dependency style of gcc... none checking how to run the C preprocessor... cpp none checking how to run the C preprocessor... cpp none checking how to run the C preprocessor... cpp yes checking for style of include used by /opt/tools/bin/gmake... GNU checking dependency style of gcc... checking for grep that handles long lines and -e... none checking for CET support... no checking how to print strings... checking for grep that handles long lines and -e... checking for grep that handles long lines and -e... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... done configure: creating ./config.status config.status: creating Makefile /tmp/work/devel/binutils/work/.tools/bin/grep checking for egrep... /tmp/work/devel/binutils/work/.tools/bin/grep -E checking for ANSI C header files... /tmp/work/devel/binutils/work/.tools/bin/grep checking for egrep... /tmp/work/devel/binutils/work/.tools/bin/grep -E checking for ANSI C header files... gmake[2]: Entering directory '/tmp/work/devel/binutils/work/binutils-2.47/etc' gmake[2]: Nothing to be done for 'all'. gmake[2]: Leaving directory '/tmp/work/devel/binutils/work/binutils-2.47/etc' /tmp/work/devel/binutils/work/.tools/bin/grep checking for egrep... /tmp/work/devel/binutils/work/.tools/bin/grep -E checking for ANSI C header files... yes /tmp/work/devel/binutils/work/.tools/bin/grep checking for egrep... checking for sys/types.h... /tmp/work/devel/binutils/work/.tools/bin/grep /tmp/work/devel/binutils/work/.tools/bin/grep -E checking for egrep... checking for ANSI C header files... /tmp/work/devel/binutils/work/.tools/bin/grep -E checking for ANSI C header files... /tmp/work/devel/binutils/work/.tools/bin/grep checking for egrep... /tmp/work/devel/binutils/work/.tools/bin/grep -E checking for fgrep... /tmp/work/devel/binutils/work/.tools/bin/grep -F checking for ld used by gcc... yes yes /bin/ld checking for sys/types.h... checking if the linker (/bin/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... checking for sys/stat.h... yes yes checking for sys/stat.h... checking for stdlib.h... yes yes checking for stdlib.h... yes checking for string.h... checking for sys/types.h... yes yes checking for sys/types.h... checking for sys/types.h... yes no checking for x86_64-sun-solaris2.11-dumpbin... no checking for x86_64-sun-solaris2.11-link... no checking for dumpbin... no checking for link... link -dump yes yes checking the name lister (nm ) interface... checking for string.h... yes yes checking for sys/stat.h... checking for memory.h... checking for sys/stat.h... checking for sys/stat.h... yes BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... yes checking for memory.h... 786240 checking whether the shell understands some XSI constructs... yes yes checking whether the shell understands "+="... yes yes yes checking for /bin/ld option to reload object files... -r checking for x86_64-sun-solaris2.11-objdump... objdump checking how to recognize dependent libraries... checking for stdlib.h... pass_all checking how to run the C preprocessor... cpp checking for strings.h... checking for stdlib.h... checking for stdlib.h... yes yes yes checking for strings.h... yes yes checking for inttypes.h... checking for string.h... checking for string.h... checking for clang... checking for string.h... yes no checking for x86_64-sun-solaris2.11-llvm-config... no checking for llvm-config... no checking for x86_64-sun-solaris2.11-ar... ar checking for -plugin option... checking for inttypes.h... yes yes --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so ar: bad option: -- usage: ar -d[-SvV] archive file ... ar -m[-abiSvV] [posname] archive file ... ar -p[-vV][-sS] archive [file ...] ar -q[-csuvSV] [file ...] ar -r[-cuvSV] [-abi] [posname] [file ...] ar -s[-vV] archive ar -t[-vV][-sS] archive [file ...] ar -x[-vV][-sSCT] archive [file ...] configure: WARNING: Failed: ar --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so rc yes yes checking for x86_64-sun-solaris2.11-ar... (cached) ar checking for x86_64-sun-solaris2.11-strip... no checking for strip... strip checking for x86_64-sun-solaris2.11-ranlib... ranlib checking command to parse nm output from gcc object... checking for stdint.h... checking for memory.h... checking for memory.h... checking for memory.h... yes checking for stdint.h... yes yes yes yes checking for unistd.h... checking for strings.h... checking for strings.h... checking for strings.h... yes checking for unistd.h... yes yes failed checking minix/config.h usability... yes checking for ANSI C header files... yes checking for inttypes.h... checking for inttypes.h... checking for inttypes.h... yes checking minix/config.h usability... yes no checking minix/config.h presence... yes yes checking for stdint.h... checking for stdint.h... checking for stdint.h... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... no checking minix/config.h presence... yes yes yes checking for unistd.h... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... checking for unistd.h... checking for unistd.h... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... yes checking minix/config.h usability... yes checking for a BSD-compatible install... /opt/tools/bin/bsdinstall -c -o pbuild -g pbuild checking whether build environment is sane... yes yes yes yes no checking for sys/types.h... checking minix/config.h usability... checking for clang... checking minix/config.h usability... checking for a thread-safe mkdir -p... no checking for x86_64-sun-solaris2.11-llvm-config... no checking for llvm-config... ./../install-sh -c -d checking for gawk... no /usr/bin/nawk checking whether /opt/tools/bin/gmake sets $(MAKE)... checking for x86_64-sun-solaris2.11-ar... (cached) ar checking for -plugin option... --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so yes ar: bad option: -- usage: ar -d[-SvV] archive file ... ar -m[-abiSvV] [posname] archive file ... ar -p[-vV][-sS] archive [file ...] ar -q[-csuvSV] [file ...] ar -r[-cuvSV] [-abi] [posname] [file ...] ar -s[-vV] archive ar -t[-vV][-sS] archive [file ...] ar -x[-vV][-sSCT] archive [file ...] configure: WARNING: Failed: ar --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so rc no checking minix/config.h presence... checking whether gcc supports -W... no checking minix/config.h presence... checking for sys/stat.h... no checking minix/config.h presence... yes checking for style of include used by /opt/tools/bin/gmake... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... GNU checking whether /opt/tools/bin/gmake supports nested variables... no checking for minix/config.h... no no checking for minix/config.h... checking whether it is safe to define __EXTENSIONS__... no checking whether it is safe to define __EXTENSIONS__... yes yes yes checking whether gcc supports -Wall... checking dependency style of gcc... checking for stdlib.h... yes checking whether byte ordering is bigendian... none checking whether /opt/tools/bin/gmake supports nested variables... (cached) yes checking whether /opt/tools/bin/gmake sets $(MAKE)... yes yes (cached) yes checking for x86_64-sun-solaris2.11-gcc... (cached) gcc yes checking how to print strings... checking how to print strings... yes checking whether gcc supports -Wwrite-strings... printf checking for a sed that does not truncate output... printf checking for a sed that does not truncate output... /usr/bin/sed /usr/bin/sed checking for fgrep... checking for string.h... checking for fgrep... /tmp/work/devel/binutils/work/.tools/bin/grep -F checking for ld used by gcc... /tmp/work/devel/binutils/work/.tools/bin/grep -F checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... /bin/ld checking if the linker (/bin/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... no checking for BSD- or MS-compatible name lister (nm)... yes yes checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc supports -Wc++-compat... checking whether gcc understands -c and -o together... (cached) yes checking for x86_64-sun-solaris2.11-ranlib... ranlib checking for x86_64-sun-solaris2.11-ar... ar checking the archiver (ar ) interface... checking for memory.h... yes ar checking how to print strings... checking whether gcc supports -Wstrict-prototypes... yes printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /tmp/work/devel/binutils/work/.tools/bin/grep -F checking for ld used by gcc... checking for strings.h... /bin/ld checking if the linker (/bin/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... no checking how to print strings... yes yes printf checking for a sed that does not truncate output... /usr/bin/sed checking whether gcc supports -Wshadow=local... checking for fgrep... /tmp/work/devel/binutils/work/.tools/bin/grep -F checking for ld used by gcc... checking for inttypes.h... /bin/ld checking if the linker (/bin/ld) is GNU ld... no no checking for x86_64-sun-solaris2.11-dumpbin... no checking for x86_64-sun-solaris2.11-dumpbin... checking for x86_64-sun-solaris2.11-link... no checking for dumpbin... no no checking for link... checking for x86_64-sun-solaris2.11-link... link -dump no checking for dumpbin... no checking for link... no checking for BSD- or MS-compatible name lister (nm)... link -dump checking the name lister (nm ) interface... checking the name lister (nm ) interface... yes checking whether gcc supports -pedantic ... yes checking for stdint.h... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 786240 yes checking whether the shell understands some XSI constructs... checking whether gcc and cc understand -c and -o together... yes checking whether the shell understands "+="... 786240 checking whether the shell understands some XSI constructs... yes yes checking whether the shell understands "+="... yes checking for /bin/ld option to reload object files... -r checking for x86_64-sun-solaris2.11-objdump... objdump checking how to recognize dependent libraries... pass_all checking for clang... yes checking for /bin/ld option to reload object files... -r checking for x86_64-sun-solaris2.11-objdump... objdump checking how to recognize dependent libraries... pass_all checking for clang... checking for unistd.h... no no checking for x86_64-sun-solaris2.11-llvm-config... checking for x86_64-sun-solaris2.11-dumpbin... no checking for llvm-config... no checking for x86_64-sun-solaris2.11-link... no no checking for dumpbin... no checking for link... checking for x86_64-sun-solaris2.11-ar... ar checking for -plugin option... no link -dump checking for x86_64-sun-solaris2.11-llvm-config... no checking for llvm-config... no checking for x86_64-sun-solaris2.11-ar... ar checking for -plugin option... checking the name lister (nm ) interface... --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so ar: bad option: -- usage: ar -d[-SvV] archive file ... ar -m[-abiSvV] [posname] archive file ... ar -p[-vV][-sS] archive [file ...] ar -q[-csuvSV] [file ...] ar -r[-cuvSV] [-abi] [posname] [file ...] ar -s[-vV] archive ar -t[-vV][-sS] archive [file ...] ar -x[-vV][-sSCT] archive [file ...] configure: WARNING: Failed: ar --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so rc --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so checking for x86_64-sun-solaris2.11-ar... (cached) ar checking for x86_64-sun-solaris2.11-strip... no checking for strip... strip checking for x86_64-sun-solaris2.11-ranlib... ranlib checking command to parse nm output from gcc object... ar: bad option: -- usage: ar -d[-SvV] archive file ... ar -m[-abiSvV] [posname] archive file ... ar -p[-vV][-sS] archive [file ...] ar -q[-csuvSV] [file ...] ar -r[-cuvSV] [-abi] [posname] [file ...] ar -s[-vV] archive ar -t[-vV][-sS] archive [file ...] ar -x[-vV][-sSCT] archive [file ...] configure: WARNING: Failed: ar --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so rc checking for x86_64-sun-solaris2.11-ar... (cached) ar checking for x86_64-sun-solaris2.11-strip... no checking for strip... strip checking for x86_64-sun-solaris2.11-ranlib... ranlib checking command to parse nm output from gcc object... yes checking for dlfcn.h... no checking for x86_64-sun-solaris2.11-dumpbin... no checking for x86_64-sun-solaris2.11-link... no checking for dumpbin... no checking for link... link -dump BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... checking the name lister (nm ) interface... 786240 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /bin/ld option to reload object files... -r checking for x86_64-sun-solaris2.11-objdump... objdump checking how to recognize dependent libraries... pass_all checking for clang... yes checking for objdir... BSD nm checking whether ln -s works... yes .libs checking the maximum length of command line arguments... no checking for x86_64-sun-solaris2.11-llvm-config... no checking for llvm-config... no checking for x86_64-sun-solaris2.11-ar... (cached) 786240 ar checking whether the shell understands some XSI constructs... checking for -plugin option... yes checking whether the shell understands "+="... yes --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so failed ar: bad option: -- usage: ar -d[-SvV] archive file ... ar -m[-abiSvV] [posname] archive file ... ar -p[-vV][-sS] archive [file ...] ar -q[-csuvSV] [file ...] ar -r[-cuvSV] [-abi] [posname] [file ...] ar -s[-vV] archive ar -t[-vV][-sS] archive [file ...] ar -x[-vV][-sSCT] archive [file ...] configure: WARNING: Failed: ar --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so rc checking for dlfcn.h... checking for /bin/ld option to reload object files... -r checking for x86_64-sun-solaris2.11-objdump... objdump checking for x86_64-sun-solaris2.11-ar... (cached) ar checking how to recognize dependent libraries... failed checking for x86_64-sun-solaris2.11-strip... pass_all no checking for clang... checking for strip... strip checking for x86_64-sun-solaris2.11-ranlib... (cached) ranlib checking command to parse nm output from gcc object... checking for dlfcn.h... no checking for x86_64-sun-solaris2.11-llvm-config... no checking for llvm-config... no yes checking for x86_64-sun-solaris2.11-ar... ar checking for -plugin option... checking for an ANSI C-conforming const... --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so ar: bad option: -- usage: ar -d[-SvV] archive file ... ar -m[-abiSvV] [posname] archive file ... ar -p[-vV][-sS] archive [file ...] ar -q[-csuvSV] [file ...] ar -r[-cuvSV] [-abi] [posname] [file ...] ar -s[-vV] archive ar -t[-vV][-sS] archive [file ...] ar -x[-vV][-sSCT] archive [file ...] configure: WARNING: Failed: ar --plugin /opt/local/gcc13/libexec/gcc/x86_64-sun-solaris2.11/13.4.0/liblto_plugin.so rc yes checking for x86_64-sun-solaris2.11-ar... (cached) ar checking for x86_64-sun-solaris2.11-strip... no checking for strip... strip checking for x86_64-sun-solaris2.11-ranlib... ranlib checking command to parse nm output from gcc object... checking for objdir... yes checking for objdir... .libs .libs yes checking for inline... checking if gcc supports -fno-rtti -fno-exceptions... failed inline checking whether byte ordering is bigendian... checking for dlfcn.h... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... failed checking for dlfcn.h... yes checking for objdir... checking if gcc supports -fno-rtti -fno-exceptions... yes checking if gcc static flag -static works... .libs checking if gcc supports -fno-rtti -fno-exceptions... yes checking for objdir... .libs no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... no checking if gcc supports -c -o file.o... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc static flag -static works... no checking for a BSD-compatible install... /opt/tools/bin/bsdinstall -c -o pbuild -g pbuild checking for CET support... no checking target system type... checking if gcc supports -fno-rtti -fno-exceptions... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking if gcc supports -c -o file.o... x86_64-sun-solaris2.11 checking for as that supports -Wa,-nH... no checking if gcc supports -c -o file.o... checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... no checking dynamic linker characteristics... no no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... checking for sys/file.h... solaris2.11 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C preprocessor... cpp yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes yes checking if gcc static flag -static works... checking for sys/param.h... no checking if gcc supports -c -o file.o... no checking dynamic linker characteristics... yes no checking if gcc supports -c -o file.o... no checking dynamic linker characteristics... checking for stdlib.h... (cached) yes checking for limits.h... solaris2.11 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for windows.h... solaris2.11 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for sys/param.h... checking for dlfcn.h... (cached) yes yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... checking for windows.h... yes checking for stdlib.h... (cached) yes yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... solaris2.11 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking for library containing dlsym... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... no checking whether to build static libraries... yes yes checking for special C compiler options needed for large files... no checking for malloc.h... checking for _FILE_OFFSET_BITS value needed for large files... checking for getpagesize... no checking for library containing dlsym... yes no no checking dynamic linker characteristics... checking for string.h... (cached) yes checking for aclocal... ${SHELL} /tmp/work/devel/binutils/work/binutils-2.47/missing aclocal-1.15 checking for autoconf... ${SHELL} /tmp/work/devel/binutils/work/binutils-2.47/missing autoconf checking for autoheader... ${SHELL} /tmp/work/devel/binutils/work/binutils-2.47/missing autoheader checking whether gcc supports -Wall... none required checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... checking for unistd.h... (cached) yes yes checking for working mmap... solaris2.11 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... none required checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... checking for strings.h... (cached) yes no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for dlfcn.h... (cached) yes checking for windows.h... checking for sys/time.h... yes no checking sys/time.h usability... checking whether gcc supports -Wextra... no checking how to compare bootstrapped objects... yes no checking for library containing dlsym... checking for time.h... cmp --ignore-initial=16 $$f1 $$f2 yes checking sys/time.h presence... yes checking whether gcc supports -Wwrite-strings... yes yes checking for memcpy... yes checking for sys/time.h... yes checking for sys/resource.h... checking for setitimer... none required checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... yes yes checking whether gcc supports -Wmissing-format-attribute... checking for sys/stat.h... (cached) yes no yes checking for sys/mman.h... yes checking whether NLS is requested... no checking pkg-config is at least version 0.9.0... checking for msgfmt... checking for strerror... no checking whether to use debuginfod... auto checking for libdebuginfod >= 0.188... no configure: WARNING: libdebuginfod is missing or some features may be unavailable. checking for libdebuginfod >= 0.179... no configure: WARNING: libdebuginfod is missing or unusable; some features may be unavailable. no checking for gmsgfmt... : yes checking for xgettext... yes no checking whether gcc supports -Wstrict-prototypes... checking for msgmerge... no checking for ld used by GCC... checking for fcntl.h... /bin/ld checking if the linker (/bin/ld) is GNU ld... no checking for shared library run path origin... yes yes checking for unistd.h... (cached) yes yes Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror checking whether byte ordering is bigendian... checking for alloca.h... checking whether gcc supports -Wmissing-prototypes... done yes checking for CFPreferencesCopyAppValue... checking for sys/pstat.h... yes checking for incompatibility between DejaGnu and GCC... configure: updating cache ./config.cache checking that generated files are newer than configure... done no checking for CFLocaleCopyPreferredLanguages... configure: creating ./config.status no checking for sys/sysmp.h... no checking for makeinfo... /tmp/work/devel/binutils/work/binutils-2.47/missing makeinfo --split-size=5000000 configure: WARNING: *** Makeinfo is missing. Info documentation will not be built. checking if using Solaris linker... Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror checking for bison... yacc checking for flex... flex yes yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether to install libbfd... yes no checking whether to use NLS... no checking whether NLS is requested... no checking whether to enable maintainer-specific portions of Makefiles... no checking sys/gmon_out.h usability... no checking for stdlib.h... (cached) yes checking lex output file root... lex.yy checking lex library... checking for sys/sysinfo.h... checking for unistd.h... (cached) yes yes checking for sys/param.h... no no checking sys/gmon_out.h presence... checking for machine/hal_sysinfo.h... no checking for sys/gmon_out.h... no checking for a known getopt prototype in unistd.h... no yes checking for sys/table.h... checking for getpagesize... checking for bison... yacc checking for flex... flex checking lex output file root... lex.yy checking lex library... yes checking for library containing fabs... no checking for sys/sysctl.h... yes checking for working mmap... no checking for sys/systemcfg.h... no checking for stdint.h... (cached) yes checking for stdio_ext.h... yes -lm yes checking byteswap.h usability... checking for process.h... no checking for sys/prctl.h... no checking byteswap.h presence... no no checking for byteswap.h... no checking for spawn.h... checking endian.h usability... yes yes checking endian.h presence... checking for libgen.h... yes checking for endian.h... yes yes Setting warning flags = -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror checking whether gprof tests can run... checking for sys/wait.h that is POSIX.1 compatible... checking whether bswap_16 is declared... yes no checking whether time.h and sys/time.h may both be included... checking whether bswap_32 is declared... yes yes checking whether errno must be declared... -lfl checking whether yytext is a pointer... no checking whether bswap_64 is declared... no checking size of int... configure: updating cache ./config.cache checking that generated files are newer than configure... done configure: creating ./config.status no 4 checking size of long... configure: updating cache ./config.cache -lfl checking whether yytext is a pointer... checking that generated files are newer than configure... done configure: creating ./config.status 8 checking size of size_t... yes checking whether NLS is requested... no checking for msgfmt... no checking for gmsgfmt... : 8 checking for long long... checking for xgettext... no checking for msgmerge... no checking for ld used by GCC... /bin/ld checking if the linker (/bin/ld) is GNU ld... no checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... yes checking size of long long... yes checking whether NLS is requested... no checking for msgfmt... no checking for gmsgfmt... : checking for xgettext... no no checking for CFLocaleCopyPreferredLanguages... checking for msgmerge... no config.status: creating Makefile checking for ld used by GCC... /bin/ld checking if the linker (/bin/ld) is GNU ld... no checking for shared library run path origin... config.status: executing depfiles commands 8 no checking whether to use NLS... no checking whether NLS is requested... no checking whether to enable maintainer-specific portions of Makefiles... no checking for a 64-bit type... checking for x86_64-sun-solaris2.11-ranlib... (cached) ranlib checking fcntl.h usability... done uint64_t checking for intptr_t... checking for CFPreferencesCopyAppValue... yes checking fcntl.h presence... yes checking for fcntl.h... yes no checking for CFLocaleCopyPreferredLanguages... checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes no checking whether to use NLS... no checking whether NLS is requested... no checking whether to enable maintainer-specific portions of Makefiles... no checking sys/file.h usability... checking for memory.h... (cached) yes yes checking for uintptr_t... config.status: executing libtool commands checking for sys/stat.h... (cached) yes checking for sys/types.h... (cached) yes yes checking sys/file.h presence... checking for unistd.h... (cached) yes yes checking for sys/file.h... checking whether compiling a cross-assembler... yes no checking for strsignal... checking for sys/stat.h... (cached) yes yes checking for ssize_t... checking sys/time.h usability... yes checking for LC_MESSAGES... yes checking sys/time.h presence... gmake[2]: Entering directory '/tmp/work/devel/binutils/work/binutils-2.47/zlib' source='adler32.c' object='libz_a-adler32.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-adler32.o `test -f 'adler32.c' || echo './'`adler32.c source='compress.c' object='libz_a-compress.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-compress.o `test -f 'compress.c' || echo './'`compress.c source='crc32.c' object='libz_a-crc32.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-crc32.o `test -f 'crc32.c' || echo './'`crc32.c source='deflate.c' object='libz_a-deflate.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-deflate.o `test -f 'deflate.c' || echo './'`deflate.c source='gzread.c' object='libz_a-gzread.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-gzread.o `test -f 'gzread.c' || echo './'`gzread.c source='gzclose.c' object='libz_a-gzclose.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-gzclose.o `test -f 'gzclose.c' || echo './'`gzclose.c source='gzwrite.c' object='libz_a-gzwrite.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-gzwrite.o `test -f 'gzwrite.c' || echo './'`gzwrite.c source='gzlib.c' object='libz_a-gzlib.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-gzlib.o `test -f 'gzlib.c' || echo './'`gzlib.c source='infback.c' object='libz_a-infback.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-infback.o `test -f 'infback.c' || echo './'`infback.c source='inffast.c' object='libz_a-inffast.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-inffast.o `test -f 'inffast.c' || echo './'`inffast.c source='inflate.c' object='libz_a-inflate.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-inflate.o `test -f 'inflate.c' || echo './'`inflate.c source='inftrees.c' object='libz_a-inftrees.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-inftrees.o `test -f 'inftrees.c' || echo './'`inftrees.c source='trees.c' object='libz_a-trees.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-trees.o `test -f 'trees.c' || echo './'`trees.c source='uncompr.c' object='libz_a-uncompr.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-uncompr.o `test -f 'uncompr.c' || echo './'`uncompr.c source='zutil.c' object='libz_a-zutil.o' libtool=no \ DEPDIR=.deps depmode=none /usr/bin/bash ./../depcomp \ gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.3.1\" -DPACKAGE_STRING=\"zlib\ 1.3.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.3.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MMAP=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I/usr/include -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include -c -o libz_a-zutil.o `test -f 'zutil.c' || echo './'`zutil.c true "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include " "CXXFLAGS=-pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include " "CFLAGS_FOR_BUILD=-pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include" "CFLAGS_FOR_TARGET=-g -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include" "INSTALL=/opt/tools/bin/bsdinstall -c -o pbuild -g pbuild" "INSTALL_DATA=/opt/tools/bin/bsdinstall -c -o pbuild -g pbuild -m 644" "INSTALL_PROGRAM=/opt/tools/bin/bsdinstall -c -o pbuild -g pbuild -m 755" "INSTALL_SCRIPT=/opt/tools/bin/bsdinstall -c -o pbuild -g pbuild -m 755" "LDFLAGS=-L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 -Wl,-R/opt/tools/lib" "LIBCFLAGS=-pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include " "LIBCFLAGS_FOR_TARGET=-g -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include" "MAKE=/opt/tools/bin/gmake" "MAKEINFO=/tmp/work/devel/binutils/work/binutils-2.47/missing makeinfo --split-size=5000000 --split-size=5000000 " "PICFLAG=" "PICFLAG_FOR_TARGET=" "SHELL=/usr/bin/bash" "EXPECT=expect" "RUNTEST=runtest" "RUNTESTFLAGS=" "exec_prefix=/opt/tools" "infodir=/opt/tools/info" "libdir=/opt/tools/lib" "prefix=/opt/tools" "tooldir=/opt/tools/x86_64-sun-solaris2.11" "AR=ar " "AS=as" "CC=gcc" "CXX=g++" "LD=/bin/ld" "LIBCFLAGS=-pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/usr/include " "NM=nm " "PICFLAG=" "RANLIB=ranlib " "DESTDIR=" DO=all multi-do # /opt/tools/bin/gmake ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:610: libz_a-adler32.o] Error 127 gmake[2]: *** Waiting for unfinished jobs.... gmake[2]: *** [Makefile:624: libz_a-compress.o] Error 127 gmake[2]: *** [Makefile:638: libz_a-crc32.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:652: libz_a-deflate.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:680: libz_a-gzclose.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:666: libz_a-gzread.o] Error 127 gmake[2]: *** [Makefile:694: libz_a-gzwrite.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:722: libz_a-infback.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:708: libz_a-gzlib.o] Error 127 gmake[2]: *** [Makefile:750: libz_a-inflate.o] Error 127 gmake[2]: *** [Makefile:736: libz_a-inffast.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:778: libz_a-trees.o] Error 127 gmake[2]: *** [Makefile:806: libz_a-zutil.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory yes checking for sys/time.h... yes gmake[2]: *** [Makefile:792: libz_a-uncompr.o] Error 127 ./../depcomp: line 2: /opt/tools/share/libtool/build-aux/depcomp: No such file or directory gmake[2]: *** [Makefile:764: libz_a-inftrees.o] Error 127 gmake[2]: Leaving directory '/tmp/work/devel/binutils/work/binutils-2.47/zlib' gmake[1]: *** [Makefile:10035: all-zlib] Error 2 gmake[1]: *** Waiting for unfinished jobs.... yes checking for working assert macro... checking for sys/types.h... (cached) yes checking for unistd.h... (cached) yes yes checking for pid_t... checking for sys/wait.h that is POSIX.1 compatible... yes checking for a known getopt prototype in unistd.h... yes checking for stdlib.h... (cached) yes yes checking whether declaration is required for environ... checking for unistd.h... (cached) yes yes checking for sys/param.h... checking for library containing strerror... yes checking whether declaration is required for ffs... yes checking for getpagesize... none required checking for asprintf... no checking whether mempcpy is declared... yes checking for working mmap... yes no checking for atexit... checking whether stpcpy is declared... config.status: creating Makefile config.status: creating testsuite/Makefile yes yes checking pkg-config is at least version 0.9.0... yes checking for fseeko... no checking for libzstd >= 1.4.0... no checking for struct stat.st_mtim.tv_sec in sys/stat.h... config.status: creating Makefile checking for basename... config.status: creating po/Makefile.in yes checking for struct stat.st_mtim.tv_nsec in sys/stat.h... config.status: creating config.h config.status: creating gconfig.h yes yes checking for fseeko64... config.status: executing depfiles commands config.status: executing depfiles commands checking for bcmp... yes no yes checking for getc_unlocked... configure: updating cache ./config.cache checking that generated files are newer than configure... done configure: creating ./config.status checking for bcopy... config.status: executing libtool commands yes checking for mkdtemp... yes checking for bsearch... config.status: executing libtool commands yes config.status: executing default-1 commands checking for mkstemp... yes checking for bzero... config.status: creating po/POTFILES config.status: creating po/Makefile yes checking for utimensat... yes checking for calloc... yes checking for utimes... yes checking for clock... yes checking for mbstate_t... yes checking for ffs... yes checking for struct stat.st_atim.tv_nsec... yes checking whether struct stat.st_atim is of type struct timespec... yes checking for getcwd... yes checking for library containing frexp... yes checking for getpagesize... none required checking for LC_MESSAGES... yes checking for gettimeofday... yes checking for a known getopt prototype in unistd.h... yes checking for utime.h... yes checking for index... yes checking whether environ is declared... yes checking for insque... no checking whether getc_unlocked is declared... yes yes checking for memchr... checking whether stpcpy is declared... yes yes checking whether strnlen is declared... checking for memrchr... yes checking for libzstd >= 1.4.0... no checking for msgpack-c... no checking for msgpack... no checking iconv.h usability... yes checking for memcmp... yes checking iconv.h presence... config.status: creating .gdbinit yes checking for iconv.h... yes checking for iconv... config.status: creating Makefile yes checking for memcpy... config.status: creating po/Makefile.in config.status: creating config.h yes config.status: executing depfiles commands checking for memmem... yes checking for working iconv... yes checking for memmove... yes checking how to link with libiconv... -liconv checking whether iconv is compatible with its POSIX signature... yes yes checking for mempcpy... no checking for memset... configure: updating cache ./config.cache checking that generated files are newer than configure... done configure: creating ./config.status yes checking for mkstemps... yes checking for putenv... yes checking for random... yes checking for rename... yes checking for rindex... config.status: executing libtool commands yes config.status: executing default-1 commands checking for setenv... config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing default commands yes checking for snprintf... yes checking for sigsetmask... no checking for stpcpy... yes checking for stpncpy... yes checking for strcasecmp... yes checking for strchr... yes checking for strdup... config.status: creating Makefile yes config.status: creating po/Makefile.in checking for strncasecmp... config.status: creating config.h config.status: executing depfiles commands yes checking for strndup... yes checking for strnlen... yes checking for strrchr... yes checking for strstr... config.status: executing libtool commands yes checking for strtod... config.status: executing default-1 commands config.status: creating po/POTFILES config.status: creating po/Makefile yes checking for strtol... yes checking for strtoul... yes checking for strtoll... yes checking for strtoull... yes checking for strverscmp... no checking for tmpnam... yes checking for vasprintf... yes checking for vfprintf... yes checking for vprintf... yes checking for vsnprintf... yes checking for vsprintf... yes checking for waitpid... yes checking for setproctitle... no checking whether alloca needs Cray hooks... no checking stack direction for C alloca... 1 checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for _doprnt... yes checking for sys_errlist... no checking for sys_nerr... no checking for sys_siglist... no checking for external symbol _system_configuration... no checking for __fsetlocking... yes checking for canonicalize_file_name... yes checking for dup3... yes checking for getrlimit... yes checking for getrusage... yes checking for getsysinfo... no checking for gettimeofday... (cached) yes checking for on_exit... no checking for pipe2... yes checking for posix_spawn... yes checking for posix_spawnp... yes checking for psignal... yes checking for pstat_getdynamic... no checking for pstat_getstatic... no checking for realpath... yes checking for setrlimit... yes checking for spawnve... no checking for spawnvpe... no checking for strerror... yes checking for strsignal... yes checking for sysconf... yes checking for sysctl... no checking for sysmp... no checking for table... no checking for times... yes checking for wait3... yes checking for wait4... yes checking for sbrk... yes checking whether basename is declared... yes checking whether ffs is declared... yes checking whether asprintf is declared... yes checking whether vasprintf is declared... yes checking whether snprintf is declared... yes checking whether vsnprintf is declared... yes checking whether calloc is declared... yes checking whether getenv is declared... yes checking whether getopt is declared... yes checking whether malloc is declared... yes checking whether realloc is declared... yes checking whether sbrk is declared... yes checking whether strtol is declared... yes checking whether strtoul is declared... yes checking whether strtoll is declared... yes checking whether strtoull is declared... yes checking whether strverscmp is declared... no checking whether strnlen is declared... yes checking whether canonicalize_file_name must be declared... no checking for SHA1 HW acceleration support... x86 SHA1 checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/param.h... (cached) yes checking for getpagesize... (cached) yes checking for working mmap... yes checking for working strncmp... yes configure: updating cache ./config.cache configure: creating ./config.status config.status: creating Makefile config.status: creating testsuite/Makefile config.status: creating config.h config.status: executing default commands gmake[1]: Leaving directory '/tmp/work/devel/binutils/work/binutils-2.47' gmake: *** [Makefile:1032: all] Error 2 *** Error code 2 Stop. bmake[1]: stopped making "all" in /data/jenkins/workspace/pkgsrc-trunk-tools/devel/binutils *** Error code 1 Stop. bmake: stopped making "all" in /data/jenkins/workspace/pkgsrc-trunk-tools/devel/binutils