=> "/opt/local/bin/bmake" ["-C", "/data/jenkins/workspace/pkgsrc-trunk-x86_64/lang/libclc", "configure", "PYTHON_VERSION_REQD=313", "BATCH=1", "DEPENDS_TARGET=/nonexistent"]
=> Checksum BLAKE2s OK for llvm-project-21.1.8.src.tar.xz
=> Checksum SHA512 OK for llvm-project-21.1.8.src.tar.xz
===> Installing dependencies for libclc-21.1.8
==========================================================================
The following variables will affect the build process of this package,
libclc-21.1.8.  Their current value is shown below:

        * PYTHON_VERSION_DEFAULT = 313

Based on these variables, the following variables have been set:

        * PYPACKAGE = python313

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/opt/local/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency cmake>=0: found cmake-4.4.3
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Build dependency gcc13>=13.4.0: found gcc13-13.4.0
=> Build dependency python313>=3.13: found python313-3.13.15
=> Full dependency clang>=21.1.0: found clang-21.1.8nb1
=> Full dependency gcc13-libs>=13.4.0: found gcc13-libs-13.4.0
=> Full dependency libunwind>=21.1.0: found libunwind-21.1.8
=> Full dependency llvm>=21.1.0: found llvm-21.1.8
=> Full dependency spirv-llvm-translator>=19.1.7nb1: found spirv-llvm-translator-21.1.11
=> Full dependency spirv-tools>=1.4.341.0<2000: found spirv-tools-1.4.357.0nb1
=> Full dependency libiconv>=1.9.1: found libiconv-1.19
=> Full dependency libxml2>=2.6.2: found libxml2-2.15.4
=> Full dependency zlib>=1.1.4: found zlib-1.3.1
=> Full dependency zstd>=1.3.6: found zstd-1.5.7
===> Overriding tools for libclc-21.1.8
===> Extracting for libclc-21.1.8
===> Patching for libclc-21.1.8
===> Creating toolchain wrappers for libclc-21.1.8
/usr/bin/sed  -e '/^#/d'  -e 's,@LINK_ARCH_DEFAULT@,link_arch64,g'  -e 's,@LINK_LIBGCC_DEFAULT@,link_libgcc_arch64,g'  -e 's,@LIBGCC_PREFIX@,/opt/local/gcc13/x86_64-sun-solaris2.11,g'  < ../../extra/gcc13-libs/files/specs.pkgsrc  > /tmp/work/lang/libclc/work/.cwrapper/specs.pkgsrc
===> Configuring for libclc-21.1.8
=> Adding run-time search paths to pkg-config files.
-- The CXX compiler identification is GNU 13.4.0
-- The C compiler identification is GNU 13.4.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /tmp/work/lang/libclc/work/.cwrapper/bin/g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /tmp/work/lang/libclc/work/.cwrapper/bin/gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found ZLIB: /tmp/work/lang/libclc/work/.buildlink/lib/libz.so (found version "1.3.1")
-- Found zstd: /tmp/work/lang/libclc/work/.buildlink/lib/libzstd.so
-- Found LibXml2: /tmp/work/lang/libclc/work/.buildlink/lib/libxml2.so (found version "2.15.4")
-- Linker detection: Solaris ld
-- libclc LLVM version: 21.1.8
-- Performing Test LINKER_SUPPORTS_Z_DISCARD_UNUSED
-- Performing Test LINKER_SUPPORTS_Z_DISCARD_UNUSED - Failed
-- Performing Test LLVM_LINKER_SUPPORTS_B_SYMBOLIC_FUNCTIONS
-- Performing Test LLVM_LINKER_SUPPORTS_B_SYMBOLIC_FUNCTIONS - Failed
-- Found Python3: /opt/local/bin/python3.13 (found version "3.13.15") found components: Interpreter
-- libclc target 'amdgcn--' is enabled
--   device: tahiti ( pitcairn;verde;oland;hainan;bonaire;kabini;kaveri;hawaii;mullins;tonga;tongapro;iceland;carrizo;fiji;stoney;polaris10;polaris11;gfx602;gfx705;gfx805;gfx900;gfx902;gfx904;gfx906;gfx908;gfx909;gfx90a;gfx90c;gfx942;gfx950;gfx1010;gfx1011;gfx1012;gfx1013;gfx1030;gfx1031;gfx1032;gfx1033;gfx1034;gfx1035;gfx1036;gfx1100;gfx1101;gfx1102;gfx1103;gfx1150;gfx1151;gfx1152;gfx1153;gfx1200;gfx1201 )
-- libclc target 'amdgcn--amdhsa' is enabled
--   device: none (  )
-- libclc target 'amdgcn-mesa-mesa3d' is enabled
--   device: tahiti ( pitcairn;verde;oland;hainan;bonaire;kabini;kaveri;hawaii;mullins;tonga;tongapro;iceland;carrizo;fiji;stoney;polaris10;polaris11;gfx602;gfx705;gfx805;gfx900;gfx902;gfx904;gfx906;gfx908;gfx909;gfx90a;gfx90c;gfx942;gfx950;gfx1010;gfx1011;gfx1012;gfx1013;gfx1030;gfx1031;gfx1032;gfx1033;gfx1034;gfx1035;gfx1036;gfx1100;gfx1101;gfx1102;gfx1103;gfx1150;gfx1151;gfx1152;gfx1153;gfx1200;gfx1201 )
-- libclc target 'clspv--' is enabled
--   device: none (  )
-- libclc target 'clspv64--' is enabled
--   device: none (  )
-- libclc target 'nvptx--' is enabled
--   device: none (  )
-- libclc target 'nvptx--nvidiacl' is enabled
--   device: none (  )
-- libclc target 'nvptx64--' is enabled
--   device: none (  )
-- libclc target 'nvptx64--nvidiacl' is enabled
--   device: none (  )
-- libclc target 'r600--' is enabled
--   device: cedar ( palm;sumo;sumo2;redwood;juniper )
--   device: cypress ( hemlock )
--   device: barts ( turks;caicos )
--   device: cayman ( aruba )
-- libclc target 'spirv-mesa3d-' is enabled
--   device: none (  )
-- libclc target 'spirv64-mesa3d-' is enabled
--   device: none (  )
-- Configuring done (12.1s)
-- Generating done (69.6s)
CMake Warning (unused-cli):
  Manually-specified variables were not used by the project:

    FETCHCONTENT_FULLY_DISCONNECTED
    PYTHON_EXECUTABLE
    PYTHON_INCLUDE_DIR
    PYTHON_INCLUDE_PATH
    Python3_INCLUDE_DIR
    Python_EXECUTABLE
    Python_INCLUDE_DIR


-- Build files have been written to: /tmp/work/lang/libclc/work/llvm-project-21.1.8.src/libclc/cmake-pkgsrc-build