+ case "${usergroup_phase}" in + local run_cmd + run_cmd=run_su + shift + run_su /opt/pkg/bin/bmake all BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/xca-2.8.0/work.log + su pbulk -c '"$@"' make /opt/pkg/bin/bmake all BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/xca-2.8.0/work.log ===> Building for xca-2.8.0 [ 0%] Generating xca.qm [ 0%] Built target xcadoc_autogen_timestamp_deps [ 0%] Built target xcalib_autogen_timestamp_deps [ 0%] Built target xcaexport_autogen_timestamp_deps Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 0%] Built target test_biobytearray_autogen_timestamp_deps [ 0%] Built target test_asn1time_autogen_timestamp_deps [ 1%] Generating xca_bg.qm [ 1%] Built target test_asn1int_autogen_timestamp_deps [ 1%] Built target test_entropy_autogen_timestamp_deps [ 1%] Built target test_x509name_autogen_timestamp_deps [ 1%] Built target test_digest_autogen_timestamp_deps Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 1%] Automatic MOC and UIC for target xcadoc [ 2%] Automatic MOC and UIC for target xcalib [ 2%] Generating xca_de.qm [ 2%] Automatic MOC and UIC for target xcaexport Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 2%] Built target xcadoc_autogen [ 2%] Generating xca_en.qm [ 2%] Automatic MOC and UIC for target test_biobytearray Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 2%] Built target xcaexport_autogen [ 3%] Generating xca_es.qm Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 3%] Automatic MOC and UIC for target test_asn1time [ 3%] Generating xca_fa.qm Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 4%] Generating xca_fr.qm [ 4%] Built target test_biobytearray_autogen AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 4%] Generating xca_hr.qm [ 5%] Automatic MOC and UIC for target test_asn1int [ 5%] Built target test_asn1time_autogen Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 6%] Automatic MOC and UIC for target test_entropy [ 7%] Generating xca_id.qm Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 7%] Generating xca_it.qm Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 7%] Built target test_asn1int_autogen [ 8%] Generating xca_ja.qm [ 9%] Automatic MOC and UIC for target test_x509name Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 9%] Built target test_entropy_autogen [ 9%] Generating xca_ko.qm [ 10%] Automatic MOC and UIC for target test_digest Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 11%] Generating xca_nl.qm AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 11%] Generating xca_pl.qm [ 11%] Built target test_x509name_autogen AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 12%] Generating xca_pt_BR.qm AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 12%] Building CXX object CMakeFiles/xcadoc.dir/xcadoc_autogen/mocs_compilation.cpp.o AutoUic: Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 12%] Built target test_digest_autogen [ 13%] Building CXX object CMakeFiles/xcadoc.dir/lib/arguments.cpp.o Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 13%] Built target xcalib_autogen [ 13%] Generating xca_ru.qm [ 13%] Building CXX object CMakeFiles/xcaexport.dir/xcaexport_autogen/mocs_compilation.cpp.o [ 14%] Building CXX object lib/CMakeFiles/test_biobytearray.dir/test_biobytearray_autogen/mocs_compilation.cpp.o Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 15%] Generating xca_sk.qm [ 15%] Building CXX object lib/CMakeFiles/test_biobytearray.dir/test_biobytearray.cpp.o Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [ 15%] Generating xca_tr.qm /home/pbulk/build/security/xca/work/xca-2.8.0/lib/arguments.cpp: In static member function 'static QString arguments::help()': /home/pbulk/build/security/xca/work/xca-2.8.0/lib/arguments.cpp:210:24: error: aggregate 'arguments::help()::winsize w' has incomplete type and cannot be defined 210 | struct winsize w; | ^ /home/pbulk/build/security/xca/work/xca-2.8.0/lib/arguments.cpp:212:18: error: 'TIOCGWINSZ' was not declared in this scope 212 | ioctl(0, TIOCGWINSZ, &w); | ^~~~~~~~~~ /home/pbulk/build/security/xca/work/xca-2.8.0/lib/arguments.cpp:212:9: error: 'ioctl' was not declared in this scope 212 | ioctl(0, TIOCGWINSZ, &w); | ^~~~~ Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. --- CMakeFiles/xcadoc.dir/lib/arguments.cpp.o --- *** [CMakeFiles/xcadoc.dir/lib/arguments.cpp.o] Error code 1 bmake[2]: stopped making "CMakeFiles/xcadoc.dir/build" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build bmake[2]: 1 error bmake[2]: stopped making "CMakeFiles/xcadoc.dir/build" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build --- CMakeFiles/xcadoc.dir/all --- *** [CMakeFiles/xcadoc.dir/all] Error code 2 bmake[1]: stopped making "all" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build --- lib/CMakeFiles/test_biobytearray.dir/all --- *** [lib/CMakeFiles/test_biobytearray.dir/all] Error code 6 bmake[1]: stopped making "all" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build --- CMakeFiles/xcaexport.dir/all --- *** [CMakeFiles/xcaexport.dir/all] Error code 6 bmake[1]: stopped making "all" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build [ 16%] Generating xca_zh_CN.qm Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. --- CMakeFiles/xca_lrelease.dir/all --- *** [CMakeFiles/xca_lrelease.dir/all] Error code 6 bmake[1]: stopped making "all" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build bmake[1]: 4 errors bmake[1]: stopped making "all" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build *** [all] Error code 2 bmake: stopped making "all" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build bmake: 1 error bmake: stopped making "all" in /home/pbulk/build/security/xca/work/xca-2.8.0/cmake-pkgsrc-build *** Error code 2 Stop. bmake[1]: stopped making "all" in /data/jenkins/workspace/pkgsrc-upstream-trunk/security/xca *** Error code 1 Stop. bmake: stopped making "all" in /data/jenkins/workspace/pkgsrc-upstream-trunk/security/xca