+ case "${usergroup_phase}" in
+ local run_cmd
+ run_cmd=run_su
+ shift
+ run_su /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/librecad-2.2.0.2nb1/work.log
+ su pbulk -c '"$@"' make /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/librecad-2.2.0.2nb1/work.log
=> Checksum BLAKE2s OK for LibreCAD-2.2.0.2.tar.gz
=> Checksum SHA512 OK for LibreCAD-2.2.0.2.tar.gz
===> Installing dependencies for librecad-2.2.0.2nb1
==========================================================================
The following variables will affect the build process of this package,
librecad-2.2.0.2nb1. Their current value is shown below:
* JPEG_DEFAULT = jpeg
* SSLBASE (defined)
* SSLCERTBUNDLE (not defined)
* SSLCERTS = /etc/opt/pkg/openssl/certs
* SSLDIR = /etc/opt/pkg/openssl
* SSLKEYS = /etc/opt/pkg/openssl/private
Based on these variables, the following variables have been set:
* JPEGBASE (defined, but empty)
* JPEG_TYPE = jpeg
You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing. Be sure to run
`/opt/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency qt5-qttools-[0-9]*: found qt5-qttools-5.15.16nb2
=> Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.82.5
=> Tool dependency libtool-base>=2.4.2nb9: found libtool-base-2.4.7nb1
=> Tool dependency bsdtar-[0-9]*: found bsdtar-3.7.7nb1
=> Tool dependency pax>=20040802: found pax-20210219
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.4.3
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Full dependency boost-libs-1.87.*: found boost-libs-1.87.0nb2
=> Full dependency boost-libs>=1.87.0: found boost-libs-1.87.0nb2
=> Full dependency freetype2>=2.13.2nb1: found freetype2-2.13.3
=> Full dependency muparser>=200: found muparser-200.2.2.2
=> Full dependency qt5-qtbase>=5.15.16nb2: found qt5-qtbase-5.15.16nb3
=> Full dependency qt5-qtsvg>=5.15.16nb1: found qt5-qtsvg-5.15.16nb1
=> Build dependency boost-headers-1.87.*: found boost-headers-1.87.0nb3
=> Build dependency xcb-proto>=1.4: found xcb-proto-1.17.0nb5
=> Build dependency xorgproto>=2016.1: found xorgproto-2024.1
=> Full dependency MesaLib>=3.4.2: found MesaLib-21.3.9nb4
=> Full dependency brotli>=1.0.1: found brotli-1.1.0
=> Full dependency bzip2>=1.0.1: found bzip2-1.0.8
=> Full dependency dbus>=0.91: found dbus-1.14.10
=> Full dependency expat>=1.95.7: found expat-2.7.1
=> Full dependency fontconfig>=2.11.91: found fontconfig-2.15.0
=> Full dependency gettext-lib>=0.22: found gettext-lib-0.22.5
=> Full dependency glib2>=2.4.0: found glib2-2.82.5
=> Full dependency glu>=6.0: found glu-9.0.3
=> Full dependency graphite2>=1.2: found graphite2-1.3.14nb3
=> Full dependency harfbuzz>=2.1.1: found harfbuzz-11.1.0
=> Full dependency libiconv>=1.9.1: found libiconv-1.17
=> Full dependency icu>=3.4: found icu-77.1
=> Full dependency jpeg>=8nb1: found jpeg-9f
=> Full dependency libICE>=0.99.1: found libICE-1.1.2
=> Full dependency libSM>=0.99.2: found libSM-1.2.6
=> Full dependency libX11>=1.5: found libX11-1.8.12
=> Full dependency libXau>=1.0: found libXau-1.0.12
=> Full dependency libXcursor>=1.1.1: found libXcursor-1.2.3
=> Full dependency libXdamage>=1.0.3: found libXdamage-1.1.6
=> Full dependency libXdmcp>=0.99: found libXdmcp-1.1.5
=> Full dependency libXext>=1.1: found libXext-1.3.6
=> Full dependency libXfixes>=4.0.1: found libXfixes-6.0.1
=> Full dependency libXft>=2.1.10: found libXft-2.3.9
=> Full dependency libXi>=1.0.0: found libXi-1.8.2
=> Full dependency libXmu>=1.0.0: found libXmu-1.2.1
=> Full dependency libXrandr>=1.1.2: found libXrandr-1.5.4
=> Full dependency libXrender>=0.9.2: found libXrender-0.9.12
=> Full dependency libXt>=1.0.0: found libXt-1.3.1
=> Full dependency libXxf86vm>=1.1.0: found libXxf86vm-1.1.6
=> Full dependency libdrm>=2.4.15: found libdrm-2.4.124
=> Full dependency libffi>=1.20: found libffi-3.4.8
=> Full dependency libpciaccess>=0.10.4: found libpciaccess-0.18.1
=> Full dependency libproxy>=0.2.3: found libproxy-0.5.9nb6
=> Full dependency libxcb>=1.6: found libxcb-1.17.0
=> Full dependency libxkbcommon>=0.4.0: found libxkbcommon-1.7.0nb6
=> Full dependency libxshmfence>=1.2: found libxshmfence-1.3.3
=> Full dependency openssl>=1.1.1: found openssl-3.4.1
=> Full dependency pcre2>=10.21: found pcre2-10.45
=> Full dependency png>=1.2.4: found png-1.6.47
=> Full dependency sqlite3>=3.0.8: found sqlite3-3.49.1nb3
=> Full dependency xcb-util>=0.3.9: found xcb-util-0.4.1
=> Full dependency xcb-util-image>=0.3.9: found xcb-util-image-0.4.1
=> Full dependency xcb-util-keysyms>=0.3.9: found xcb-util-keysyms-0.4.1
=> Full dependency xcb-util-renderutil>=0.3.8nb1: found xcb-util-renderutil-0.3.10
=> Full dependency xcb-util-wm>=0.3.9: found xcb-util-wm-0.4.2nb1
=> Full dependency zlib>=1.1.4: found zlib-1.3.1
===> Overriding tools for librecad-2.2.0.2nb1
===> Extracting for librecad-2.2.0.2nb1
===> Patching for librecad-2.2.0.2nb1
=> Applying pkgsrc patches for librecad-2.2.0.2nb1
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/cad/librecad/patches/patch-librecad_src_main_qc__applicationwindow.cpp
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/cad/librecad/patches/patch-librecad_src_main_qc__applicationwindow.cpp
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-librecad_src_main_qc__applicationwindow.cpp,v 1.2 2019/10/26 12:23:01 kamil Exp $
|
|ignore files in the plugins directory that do not contain '.so', as
|pkgsrc leaves some .la files there
|
|--- librecad/src/main/qc_applicationwindow.cpp.orig 2018-02-15 20:54:45.000000000 +0000
|+++ librecad/src/main/qc_applicationwindow.cpp
--------------------------
Patching file librecad/src/main/qc_applicationwindow.cpp using Plan A...
Hunk #1 succeeded at 648 (offset 249 lines).
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/cad/librecad/patches/patch-scripts_postprocess-unix.sh
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/cad/librecad/patches/patch-scripts_postprocess-unix.sh
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-scripts_postprocess-unix.sh,v 1.5 2025/01/20 23:29:25 gdt Exp $
|
|Fix QTDIR.
|
|--- scripts/postprocess-unix.sh.orig 2022-12-17 11:13:13.000000000 +0000
|+++ scripts/postprocess-unix.sh
--------------------------
Patching file scripts/postprocess-unix.sh using Plan A...
Hunk #1 succeeded at 9.
done
===> Creating toolchain wrappers for librecad-2.2.0.2nb1
===> Configuring for librecad-2.2.0.2nb1
=> Set qt5/bin
=> Checking for portability problems in extracted files
Info: creating stash file /home/pbulk/build/cad/librecad/work/LibreCAD-2.2.0.2/.qmake.stash
Project MESSAGE: We will be using CPP11 features
=> Modifying libtool scripts to use pkgsrc libtool
=> Modifying libtool scripts to use pkgsrc depcomp