+ case "${usergroup_phase}" in + local run_cmd + run_cmd=run_su + shift + run_su /opt/pkg/bin/bmake all BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/gforth-0.7.3nb10/work.log + su pbulk -c '"$@"' make /opt/pkg/bin/bmake all BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/gforth-0.7.3nb10/work.log ===> Building for gforth-0.7.3nb10 if test -r version && test x'0.7.3' = x`cat version` ; then true ; else echo 0.7.3 > version ; fi echo ": version-string s\" 0.7.3\" ;" > kernel/version.fs aclocal aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' cd . && autoheader autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' echo timestamp > ./stamp-h.in sed -f mkdosmf.sed makefile.dos sed -f mkdosmf.sed engine/makefile.dos sed -f mkos2mf.sed makefile.os2 sed -f mkos2mf.sed engine/makefile.os2 echo '%.o: %.c' >>makefile.os2 echo ' $(GCC) $(CFLAGS) $(CPPFLAGS) -c $<' >>makefile.os2 echo '%.o: %.c' >>engine/makefile.os2 echo ' $(GCC) $(CFLAGS) $(CPPFLAGS) -c $<' >>engine/makefile.os2 cd . && autoconf configure.in:46: warning: The macro 'AC_HELP_STRING' is obsolete. configure.in:46: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.in:46: the top level configure.in:56: warning: The macro 'AC_HELP_STRING' is obsolete. configure.in:56: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.in:56: the top level configure.in:89: warning: The macro 'AC_HELP_STRING' is obsolete. configure.in:89: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.in:89: the top level configure.in:141: warning: The macro 'AC_GNU_SOURCE' is obsolete. configure.in:141: You should run autoupdate. ./lib/autoconf/specific.m4:489: AC_GNU_SOURCE is expanded from... configure.in:141: the top level configure.in:199: warning: The macro 'AC_TRY_RUN' is obsolete. configure.in:199: You should run autoupdate. ./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from... configure.in:199: the top level configure.in:225: warning: AC_LIBOBJ(../$arm_cacheflush): you should use literals ./lib/autoconf/general.m4:3238: AC_LIBOBJ is expanded from... configure.in:225: the top level configure.in:255: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:255: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:255: the top level configure.in:568: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:568: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:568: the top level configure.in:576: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:576: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:576: the top level configure.in:584: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:584: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:584: the top level configure.in:592: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:592: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:592: the top level configure.in:600: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:600: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:600: the top level configure.in:608: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:608: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:608: the top level configure.in:616: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:616: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:616: the top level configure.in:622: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:622: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:622: the top level configure.in:770: warning: The macro 'AC_TRY_RUN' is obsolete. configure.in:770: You should run autoupdate. ./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from... configure.in:770: the top level configure.in:815: warning: The macro 'AC_TRY_COMPILE' is obsolete. configure.in:815: You should run autoupdate. ./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from... configure.in:815: the top level configure.in:889: warning: The macro 'AC_DECL_SYS_SIGLIST' is obsolete. configure.in:889: You should run autoupdate. ./lib/autoconf/specific.m4:40: AC_DECL_SYS_SIGLIST is expanded from... configure.in:889: the top level ./config.status --recheck ./config.status config.status: creating Makefile config.status: creating Makedist config.status: creating gforthmi config.status: creating vmgen config.status: creating machpc.fs config.status: creating envos.fs config.status: creating preforth config.status: creating engine/Makefile config.status: WARNING: 'engine/Makefile.in' seems to ignore the --datarootdir setting config.status: creating engine/libcc.h config.status: creating doc/version.texi config.status: creating build-ec config.status: creating engine/config.h config.status: executing stamp-h commands if test -z ""; then for i in -ll-reg -noll-reg -ll -noll; do /opt/pkg/bin/bmake optgforth OPT=$i && cp -p gforth${i} gforth && break; done; else ( cd engine && /opt/pkg/bin/bmake gforth ) && cp -p engine/gforth gforth && true gforth; true; /opt/pkg/bin/bmake checkone check-nofast ENGINE=./engine/gforth; fi /opt/pkg/bin/bmake gforth-ll-reg OPT=-ll-reg OPTDEFINES="-DFORCE_LL -DFORCE_REG" OPTOBJECTS= ./config.status --recheck if test -z "-ll-reg"; then for i in -ll-reg -noll-reg -ll -noll; do /opt/pkg/bin/bmake optgforth OPT=$i && cp -p gforth${i} gforth-ll-reg && break; done; else ( cd engine && /opt/pkg/bin/bmake gforth-ll-reg ) && cp -p engine/gforth-ll-reg gforth-ll-reg && true gforth-ll-reg; true; /opt/pkg/bin/bmake checkone check-nofast ENGINE=./engine/gforth-ll-reg; fi cd .. && CONFIG_FILES=stamp-h CONFIG_HEADERS=engine/config.h ./config.status config.status: creating stamp-h config.status: creating engine/config.h config.status: engine/config.h is unchanged config.status: executing stamp-h commands echo timestamp > stamp-h gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -o engine-ll-reg.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -DENGINE=2 -o engine2-ll-reg.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -DGFORTH_DEBUGGING -o main-ll-reg.o -c ./main.c ./main.c:252:12: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] 252 | const char const* const prim_names[]={ | ^~~~~ ./main.c:696:2: warning: #warning You can ignore the warnings about clobbered variables in gforth_go [-Wcpp] 696 | #warning You can ignore the warnings about clobbered variables in gforth_go | ^~~~~~~ ./main.c: In function 'print_diag': ./main.c:2210:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 2210 | if((relocs < nonrelocs) || | ^~ ./main.c:2218:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 2218 | fprintf(stderr, "*** %sperformance problems ***\n%s%s", | ^~~~~~~ gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o io.o io.c gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o signals.o signals.c gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o support-ll-reg.o ./support.c gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o pow10.o pow10.c gcc -L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 engine-ll-reg.o engine2-ll-reg.o main-ll-reg.o io.o signals.o support-ll-reg.o pow10.o -lavcall -lffi -lltdl -lm -o gforth-ll-reg ./config.status --recheck ./preforth -p ".:~+:." -e 's" mach16b.fs"' ./kernel/main.fs -e "save-cross kernl16b.fi- /opt/pkg/bin/gforth-0.7.3 bye" redefined NIL Unresolved: Nothing! address-space Start: 00000 End: 00000 DP: 00000 user-region Start: 01674 End: 01874 DP: 016A4 dictionary Start: 00100 End: 00100 DP: 08804 return-stack Start: 00000 End: 00000 DP: 00000 data-stack Start: 00000 End: 00000 DP: 00000 tib-region Start: 00000 End: 00000 DP: 00000 Saving to kernl16b.fi- ./preforth -p ".:~+:." -e 's" mach16l.fs"' ./kernel/main.fs -e "save-cross kernl16l.fi- /opt/pkg/bin/gforth-0.7.3 bye" redefined NIL Unresolved: Nothing! address-space Start: 00000 End: 00000 DP: 00000 user-region Start: 01674 End: 01874 DP: 016A4 dictionary Start: 00100 End: 00100 DP: 08804 return-stack Start: 00000 End: 00000 DP: 00000 data-stack Start: 00000 End: 00000 DP: 00000 tib-region Start: 00000 End: 00000 DP: 00000 Saving to kernl16l.fi- ./preforth -p ".:~+:." -e 's" mach32b.fs"' ./kernel/main.fs -e "save-cross kernl32b.fi- /opt/pkg/bin/gforth-0.7.3 bye" redefined NIL Unresolved: Nothing! address-space Start: 0000.0000 End: 0000.0000 DP: 0000.0000 user-region Start: 0000.1DC0 End: 0000.21C0 DP: 0000.1E20 dictionary Start: 0000.0100 End: 0080.0100 DP: 0000.DA38 return-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 data-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 tib-region Start: 0000.0000 End: 0000.0000 DP: 0000.0000 Saving to kernl32b.fi- ./preforth -p ".:~+:." -e 's" mach32l.fs"' ./kernel/main.fs -e "save-cross kernl32l.fi- /opt/pkg/bin/gforth-0.7.3 bye" redefined NIL Unresolved: Nothing! address-space Start: 0000.0000 End: 0000.0000 DP: 0000.0000 user-region Start: 0000.1DC0 End: 0000.21C0 DP: 0000.1E20 dictionary Start: 0000.0100 End: 0080.0100 DP: 0000.DA38 return-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 data-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 tib-region Start: 0000.0000 End: 0000.0000 DP: 0000.0000 Saving to kernl32l.fi- ./preforth -p ".:~+:." -e 's" mach64b.fs"' ./kernel/main.fs -e "save-cross kernl64b.fi- /opt/pkg/bin/gforth-0.7.3 bye" redefined NIL Unresolved: Nothing! address-space Start: 0000.0000 End: 0000.0000 DP: 0000.0000 user-region Start: 0000.3040 End: 0000.3840 DP: 0000.3100 dictionary Start: 0000.0100 End: 0080.0100 DP: 0001.8238 return-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 data-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 tib-region Start: 0000.0000 End: 0000.0000 DP: 0000.0000 Saving to kernl64b.fi- ./preforth -p ".:~+:." -e 's" mach64l.fs"' ./kernel/main.fs -e "save-cross kernl64l.fi- /opt/pkg/bin/gforth-0.7.3 bye" redefined NIL Unresolved: Nothing! address-space Start: 0000.0000 End: 0000.0000 DP: 0000.0000 user-region Start: 0000.3040 End: 0000.3840 DP: 0000.3100 dictionary Start: 0000.0100 End: 0080.0100 DP: 0001.8238 return-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 data-stack Start: 0000.0000 End: 0000.0000 DP: 0000.0000 tib-region Start: 0000.0000 End: 0000.0000 DP: 0000.0000 Saving to kernl64l.fi- cp -p kernl64l.fi kernl64l.fi~ cp -p kernl64l.fi- kernl64l.fi cd engine && /opt/pkg/bin/bmake gforth-ditc-noll OPT=-noll OPTDEFINES= OPTOBJECTS=dblsub.o gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DDOUBLY_INDIRECT -o engine-ditc-noll.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -DDOUBLY_INDIRECT -o main-ditc-noll.o -c ./main.c ./main.c:696:2: warning: #warning You can ignore the warnings about clobbered variables in gforth_go [-Wcpp] 696 | #warning You can ignore the warnings about clobbered variables in gforth_go | ^~~~~~~ ./main.c: In function 'print_diag': ./main.c:2210:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 2210 | if((relocs < nonrelocs) || | ^~ ./main.c:2218:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 2218 | fprintf(stderr, "*** %sperformance problems ***\n%s%s", | ^~~~~~~ ./main.c: At top level: ./main.c:919:14: warning: 'bsearch_next' defined but not used [-Wunused-function] 919 | static Label bsearch_next(Label key, Label *a, UCell n) | ^~~~~~~~~~~~ gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o support-noll.o ./support.c gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o dblsub.o dblsub.c gcc -L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 engine-ditc-noll.o main-ditc-noll.o io.o signals.o support-noll.o pow10.o dblsub.o -lavcall -lffi -lltdl -lm -o gforth-ditc-noll cp -p engine/gforth-ditc-noll gforth-ditc true GFORTHD="./gforth-ditc -p .:." GFORTH="./gforth-ditc --die-on-signal -p .:. -i kernl64l.fi exboot.fs startup.fs arch/amd64/asm.fs arch/amd64/disasm.fs" includedir=`pwd`/include bindir=`pwd` libccdir=`pwd`/lib/gforth/0.7.3/libcc-named/ ./gforthmi gforth.fi --die-on-signal -p ".:~+:." -i kernl64l.fi exboot.fs startup.fs arch/amd64/asm.fs arch/amd64/disasm.fs redefined th data offset=1C0 code offset=D0 xt offset=B0 grep -v '^#line ' ./engine/prim.i >engine/prim-s.i ./engine/gforth-ll-reg --die-on-signal -p ".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3:." test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs test/string.fs test/float.fs test/deferred.fs test/coreext.fs test/search.fs -e bye 2>&1 | tr -d '\015' | diff -c - ./test/coretest.out diff: stdin: Value too large for defined data type *** Error code 2 Stop. bmake[3]: stopped making "checkone check-nofast" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[2]: stopped making "gforth-ll-reg" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[1]: stopped making "optgforth" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 /opt/pkg/bin/bmake gforth-noll-reg OPT=-noll-reg OPTDEFINES=-DFORCE_REG OPTOBJECTS=dblsub.o ./config.status --recheck if test -z "-noll-reg"; then for i in -ll-reg -noll-reg -ll -noll; do /opt/pkg/bin/bmake optgforth OPT=$i && cp -p gforth${i} gforth-noll-reg && break; done; else ( cd engine && /opt/pkg/bin/bmake gforth-noll-reg ) && cp -p engine/gforth-noll-reg gforth-noll-reg && true gforth-noll-reg; true; /opt/pkg/bin/bmake checkone check-nofast ENGINE=./engine/gforth-noll-reg; fi gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -o engine-noll-reg.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -DENGINE=2 -o engine2-noll-reg.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -DGFORTH_DEBUGGING -o main-noll-reg.o -c ./main.c ./main.c:252:12: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] 252 | const char const* const prim_names[]={ | ^~~~~ ./main.c:696:2: warning: #warning You can ignore the warnings about clobbered variables in gforth_go [-Wcpp] 696 | #warning You can ignore the warnings about clobbered variables in gforth_go | ^~~~~~~ ./main.c: In function 'print_diag': ./main.c:2210:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 2210 | if((relocs < nonrelocs) || | ^~ ./main.c:2218:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 2218 | fprintf(stderr, "*** %sperformance problems ***\n%s%s", | ^~~~~~~ gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_REG -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o support-noll-reg.o ./support.c gcc -L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 engine-noll-reg.o engine2-noll-reg.o main-noll-reg.o io.o signals.o support-noll-reg.o pow10.o dblsub.o -lavcall -lffi -lltdl -lm -o gforth-noll-reg ./config.status --recheck ./engine/gforth-noll-reg --die-on-signal -p ".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3:." test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs test/string.fs test/float.fs test/deferred.fs test/coreext.fs test/search.fs -e bye 2>&1 | tr -d '\015' | diff -c - ./test/coretest.out diff: stdin: Value too large for defined data type *** Error code 2 Stop. bmake[3]: stopped making "checkone check-nofast" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[2]: stopped making "gforth-noll-reg" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[1]: stopped making "optgforth" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 /opt/pkg/bin/bmake gforth-ll OPT=-ll OPTDEFINES=-DFORCE_LL OPTOBJECTS= ./config.status --recheck if test -z "-ll"; then for i in -ll-reg -noll-reg -ll -noll; do /opt/pkg/bin/bmake optgforth OPT=$i && cp -p gforth${i} gforth-ll && break; done; else ( cd engine && /opt/pkg/bin/bmake gforth-ll ) && cp -p engine/gforth-ll gforth-ll && true gforth-ll; true; /opt/pkg/bin/bmake checkone check-nofast ENGINE=./engine/gforth-ll; fi gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -o engine-ll.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -DENGINE=2 -o engine2-ll.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -DGFORTH_DEBUGGING -o main-ll.o -c ./main.c ./main.c:252:12: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] 252 | const char const* const prim_names[]={ | ^~~~~ ./main.c:696:2: warning: #warning You can ignore the warnings about clobbered variables in gforth_go [-Wcpp] 696 | #warning You can ignore the warnings about clobbered variables in gforth_go | ^~~~~~~ ./main.c: In function 'print_diag': ./main.c:2210:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 2210 | if((relocs < nonrelocs) || | ^~ ./main.c:2218:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 2218 | fprintf(stderr, "*** %sperformance problems ***\n%s%s", | ^~~~~~~ gcc -c -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DFORCE_LL -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -o support-ll.o ./support.c gcc -L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 engine-ll.o engine2-ll.o main-ll.o io.o signals.o support-ll.o pow10.o -lavcall -lffi -lltdl -lm -o gforth-ll ./config.status --recheck ./engine/gforth-ll --die-on-signal -p ".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3:." test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs test/string.fs test/float.fs test/deferred.fs test/coreext.fs test/search.fs -e bye 2>&1 | tr -d '\015' | diff -c - ./test/coretest.out diff: stdin: Value too large for defined data type *** Error code 2 Stop. bmake[3]: stopped making "checkone check-nofast" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[2]: stopped making "gforth-ll" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[1]: stopped making "optgforth" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 /opt/pkg/bin/bmake gforth-noll OPT=-noll OPTDEFINES= OPTOBJECTS=dblsub.o ./config.status --recheck if test -z "-noll"; then for i in -ll-reg -noll-reg -ll -noll; do /opt/pkg/bin/bmake optgforth OPT=$i && cp -p gforth${i} gforth-noll && break; done; else ( cd engine && /opt/pkg/bin/bmake gforth-noll ) && cp -p engine/gforth-noll gforth-noll && true gforth-noll; true; /opt/pkg/bin/bmake checkone check-nofast ENGINE=./engine/gforth-noll; fi gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -o engine-noll.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -fno-gcse -fno-strict-aliasing -fno-crossjumping -fno-reorder-blocks -falign-labels=1 -falign-loops=1 -falign-jumps=1 -DGFORTH_DEBUGGING -DENGINE=2 -o engine2-noll.o -c ./engine.c gcc -I./../arch/amd64 -I. -Wall -Dunix -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -I/opt/pkg/include -I/usr/include -DHAVE_CONFIG_H -DDEFAULTPATH='".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3"' -I/opt/pkg/include -I/usr/include -DGFORTH_DEBUGGING -o main-noll.o -c ./main.c ./main.c:252:12: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] 252 | const char const* const prim_names[]={ | ^~~~~ ./main.c:696:2: warning: #warning You can ignore the warnings about clobbered variables in gforth_go [-Wcpp] 696 | #warning You can ignore the warnings about clobbered variables in gforth_go | ^~~~~~~ ./main.c: In function 'print_diag': ./main.c:2210:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 2210 | if((relocs < nonrelocs) || | ^~ ./main.c:2218:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 2218 | fprintf(stderr, "*** %sperformance problems ***\n%s%s", | ^~~~~~~ gcc -L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 engine-noll.o engine2-noll.o main-noll.o io.o signals.o support-noll.o pow10.o dblsub.o -lavcall -lffi -lltdl -lm -o gforth-noll ./config.status --recheck ./engine/gforth-noll --die-on-signal -p ".:/opt/pkg/lib/gforth/site-forth:/opt/pkg/share/gforth/site-forth:/opt/pkg/lib/gforth/0.7.3:/opt/pkg/share/gforth/0.7.3:." test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs test/string.fs test/float.fs test/deferred.fs test/coreext.fs test/search.fs -e bye 2>&1 | tr -d '\015' | diff -c - ./test/coretest.out diff: stdin: Value too large for defined data type *** Error code 2 Stop. bmake[3]: stopped making "checkone check-nofast" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[2]: stopped making "gforth-noll" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[1]: stopped making "optgforth" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake: stopped making "all info" in /home/pbulk/build/lang/gforth/work/gforth-0.7.3 *** Error code 1 Stop. bmake[1]: stopped making "all" in /data/jenkins/workspace/pkgsrc-upstream-trunk/lang/gforth *** Error code 1 Stop. bmake: stopped making "all" in /data/jenkins/workspace/pkgsrc-upstream-trunk/lang/gforth