+ case "${usergroup_phase}" in
+ local run_cmd
+ run_cmd=run_su
+ shift
+ run_su /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/mtools-4.0.43/work.log
+ su pbulk -c '"$@"' make /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/mtools-4.0.43/work.log
=> Checksum BLAKE2s OK for mtools-4.0.43.tar.bz2
=> Checksum SHA512 OK for mtools-4.0.43.tar.bz2
===> Installing dependencies for mtools-4.0.43
==========================================================================
The supported build options for mtools are:

	floppyd

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.mtools (not defined)

==========================================================================
=> Tool dependency gmake>=3.81: found gmake-4.4.1
=> Tool dependency gtexinfo>=3.12: found gtexinfo-7.2nb1
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Full dependency pkg_install-info-[0-9]*: found pkg_install-info-4.5nb3
=> Full dependency libiconv>=1.9.1nb4: found libiconv-1.17
===> Overriding tools for mtools-4.0.43
===> Extracting for mtools-4.0.43
===> Patching for mtools-4.0.43
=> Applying pkgsrc patches for mtools-4.0.43
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/sysutils/mtools/patches/patch-aa
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/sysutils/mtools/patches/patch-aa
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-aa,v 1.12 2011/03/09 20:25:08 asau Exp $
|
|--- Makefile.in.orig	2010-10-17 02:23:20.000000000 +0400
|+++ Makefile.in	2011-03-09 23:09:25.000000000 +0300
--------------------------
Patching file Makefile.in using Plan A...
Hunk #1 succeeded at 26.
Hunk #2 succeeded at 64.
Hunk #3 succeeded at 264 (offset -13 lines).
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/sysutils/mtools/patches/patch-ae
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/sysutils/mtools/patches/patch-ae
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-ae,v 1.4 2013/01/18 00:34:30 mef Exp $
|
|See
|http://gnats.netbsd.org/18771
|
|mtools drops its privileges so thoroughly that it can't regain its
|original effective group id for opening the device file. This
|defeats the "setgid mtools" setup that is mentioned in the
|documentation and described in the comment above Setuid() in
|privileges.c.
|
|--- privileges.c.orig	2003-12-11 18:07:44.000000000 +0000
|+++ privileges.c
--------------------------
Patching file privileges.c using Plan A...
Hunk #1 succeeded at 111 (offset 43 lines).
Hunk #2 succeeded at 119 (offset 43 lines).
done
===> Creating toolchain wrappers for mtools-4.0.43
===> Configuring for mtools-4.0.43
=> Modifying GNU configure scripts to avoid --recheck
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Replacing install-sh with pkgsrc version
=> Checking for portability problems in extracted files
configure: WARNING: unrecognized options: --with-libiconv-prefix
checking for x86_64-sun-solaris2.11-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /opt/pkg/bin/bsdinstall -c -o pbulk -g pbulk
checking whether ln -s works... yes
checking for install-info... /home/pbulk/build/sysutils/mtools/work/.tools/bin/install-info
checking build system type... x86_64-sun-solaris2.11
checking host system type... x86_64-sun-solaris2.11
checking target system type... x86_64-sun-solaris2.11
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for getpwnam in -lsun... no
checking for media_oldaliases... no
checking for iconv in -liconv... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... (cached) /usr/xpg4/bin/grep
checking for egrep... (cached) /usr/xpg4/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for inttypes.h... (cached) yes
checking libc.h usability... no
checking libc.h presence... no
checking for libc.h... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for memory.h... (cached) yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking io.h usability... no
checking io.h presence... no
checking for io.h... no
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking sys/signal.h usability... yes
checking sys/signal.h presence... yes
checking for sys/signal.h... yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking sgtty.h usability... yes
checking sgtty.h presence... yes
checking for sgtty.h... yes
checking sys/floppy.h usability... no
checking sys/floppy.h presence... no
checking for sys/floppy.h... no
checking mntent.h usability... no
checking mntent.h presence... no
checking for mntent.h... no
checking sys/sysmacros.h usability... yes
checking sys/sysmacros.h presence... yes
checking for sys/sysmacros.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking iconv.h usability... yes
checking iconv.h presence... yes
checking for iconv.h... yes
checking wctype.h usability... yes
checking wctype.h presence... yes
checking for wctype.h... yes
checking wchar.h usability... yes
checking wchar.h presence... yes
checking for wchar.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking xlocale.h usability... yes
checking xlocale.h presence... yes
checking for xlocale.h... yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking termio.h usability... yes
checking termio.h presence... yes
checking for termio.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking sys/fdio.h usability... yes
checking sys/fdio.h presence... yes
checking for sys/fdio.h... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for int8_t... yes
checking for int16_t... yes
checking for int32_t... yes
checking for uint8_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for ssize_t... yes
checking for size_t... yes
checking for off_t... yes
checking for uid_t in sys/types.h... yes
checking for pid_t... yes
checking for caddr_t... yes
checking for long long... yes
checking size of size_t... 8
checking size of off_t... 8
checking size of time_t... 8
checking size of long... 8
checking size of int... 4
checking for htons... yes
checking for an ANSI C-conforming const... (cached) yes
checking for inline... (cached) inline
checking for size_t... (cached) yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for strerror... yes
checking for random... yes
checking for srandom... yes
checking for strchr... yes
checking for strrchr... yes
checking for lockf... yes
checking for flock... yes
checking for strcasecmp... yes
checking for strncasecmp... yes
checking for strnlen... yes
checking for atexit... yes
checking for on_exit... no
checking for getpass... yes
checking for memmove... yes
checking for strdup... yes
checking for strndup... yes
checking for strcspn... yes
checking for strspn... yes
checking for strtoul... yes
checking for strtol... yes
checking for strtoll... yes
checking for strtoui... no
checking for memcpy... yes
checking for strpbrk... yes
checking for memset... yes
checking for setenv... yes
checking for seteuid... yes
checking for setresuid... no
checking for tcsetattr... yes
checking for tcflush... yes
checking for basename... yes
checking for readdir... yes
checking for snprintf... yes
checking for setlocale... yes
checking for strstr... yes
checking for toupper_l... yes
checking for strncasecmp_l... yes
checking for wcsdup... yes
checking for wcscasecmp... yes
checking for wcsnlen... yes
checking for putwc... yes
checking for alarm... yes
checking for sigaction... yes
checking for usleep... yes
checking for lstat... yes
checking for unsetenv... yes
checking for mkdir... yes
checking for utimes... yes
checking for tzset... yes
checking for gettimeofday... yes
checking whether sys_errlist is declared... no
checking whether optarg is declared... yes
checking for X... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
configure: WARNING: unrecognized options: --with-libiconv-prefix