+ case "${usergroup_phase}" in
+ local run_cmd
+ run_cmd=run_su
+ shift
+ run_su /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent PYTHON_VERSION_REQD=312 WRKLOG=/tmp/bulklog/sane-backends-1.3.1nb7/work.log
+ su pbulk -c '"$@"' make /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent PYTHON_VERSION_REQD=312 WRKLOG=/tmp/bulklog/sane-backends-1.3.1nb7/work.log
=> Checksum BLAKE2s OK for sane-backends-1.3.1.tar.gz
=> Checksum SHA512 OK for sane-backends-1.3.1.tar.gz
===> Installing dependencies for sane-backends-1.3.1nb7
==========================================================================
The supported build options for sane-backends are:

	inet6 nls snmp

The currently selected options are:

	inet6 nls

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.sane-backends (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
sane-backends-1.3.1nb7.  Their current value is shown below:

        * JPEG_DEFAULT = libjpeg-turbo
        * PYTHON_VERSION_DEFAULT = 312

Based on these variables, the following variables have been set:

        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = libjpeg-turbo
        * PYPACKAGE = python312

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/opt/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency python312>=3.12: found python312-3.12.11
=> Tool dependency libtool-base>=2.4.2nb9: found libtool-base-2.4.7nb1
=> Tool dependency gmake>=3.81: found gmake-4.4.1
=> Tool dependency gettext-tools>=0.15: found gettext-tools-0.22.5nb1
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.4.3nb1
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Full dependency gettext-lib>=0.22: found gettext-lib-0.22.5
=> Full dependency libjpeg-turbo>=1.1.0: found libjpeg-turbo-3.1.1
=> Full dependency libusb1>=1.0.9: found libusb1-1.0.29
=> Full dependency libxml2>=2.14.2nb1: found libxml2-2.14.5
=> Full dependency tiff>=4.7.0nb1: found tiff-4.7.0nb1
=> Full dependency libiconv>=1.9.1: found libiconv-1.17nb1
=> Full dependency jbigkit>=2.0: found jbigkit-2.1nb1
=> Full dependency xz>=5.0.0: found xz-5.8.1
=> Full dependency zlib>=1.1.4: found zlib-1.3.1
===> Overriding tools for sane-backends-1.3.1nb7
===> Extracting for sane-backends-1.3.1nb7
===> Patching for sane-backends-1.3.1nb7
=> Applying pkgsrc patches for sane-backends-1.3.1nb7
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-aa
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-aa
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-aa,v 1.15 2024/09/24 15:48:37 triaxx Exp $
|
|Adapt installation to pkgsrc example config file location.
|
|--- backend/Makefile.in.orig	2009-04-30 13:41:18.000000000 +0000
|+++ backend/Makefile.in
--------------------------
Patching file backend/Makefile.in using Plan A...
Hunk #1 succeeded at 2421.
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-ab
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-ab
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-ab,v 1.18 2024/09/24 15:48:37 triaxx Exp $
|
|Add SunOS byteorder needs.
|
|--- configure.orig	2015-10-04 13:18:39.000000000 +0000
|+++ configure
--------------------------
Patching file configure using Plan A...
Hunk #1 succeeded at 20599.
Hunk #2 succeeded at 20789.
Hunk #3 succeeded at 23567.
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-backend_epson.c
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-backend_epson.c
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-backend_epson.c,v 1.1 2024/11/01 19:27:58 triaxx Exp $
|
|Rename send() function as it conflicts with system function on Darwin with
|recent clang-16.
|https://gitlab.com/sane-project/backends/-/commit/1b12daf3d521495c6fb325d82035a83f100e0cc1
|
|--- backend/epson.c.orig	2024-11-01 18:21:24.509916894 +0000
|+++ backend/epson.c
--------------------------
Patching file backend/epson.c using Plan A...
Hunk #1 succeeded at 851.
Hunk #2 succeeded at 880.
Hunk #3 succeeded at 1072.
Hunk #4 succeeded at 1151.
Hunk #5 succeeded at 1160.
Hunk #6 succeeded at 1179.
Hunk #7 succeeded at 1190.
Hunk #8 succeeded at 1224.
Hunk #9 succeeded at 1238.
Hunk #10 succeeded at 1267.
Hunk #11 succeeded at 1285.
Hunk #12 succeeded at 1376.
Hunk #13 succeeded at 1621.
Hunk #14 succeeded at 1658.
Hunk #15 succeeded at 1782.
Hunk #16 succeeded at 1824.
Hunk #17 succeeded at 1866.
Hunk #18 succeeded at 1874.
Hunk #19 succeeded at 4958.
Hunk #20 succeeded at 4999.
Hunk #21 succeeded at 5081.
Hunk #22 succeeded at 5120.
Hunk #23 succeeded at 5207.
Hunk #24 succeeded at 5347.
Hunk #25 succeeded at 5388.
Hunk #26 succeeded at 5460.
Hunk #27 succeeded at 5470.
Hunk #28 succeeded at 6132.
Hunk #29 succeeded at 6234.
Hunk #30 succeeded at 6287.
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-backend_pixma_pixma__bjnp.c
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-backend_pixma_pixma__bjnp.c
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-backend_pixma_pixma__bjnp.c,v 1.2 2022/01/04 16:04:40 triaxx Exp $
|
|Reuse BJNP_HOST_MAX instead of possible undefined HOST_NAME_MAX.
|
|scanner_host is populated via get_scanner_name() that is already
|limited by BJNP_HOST_MAX.
|
|--- backend/pixma/pixma_bjnp.c.orig	2020-05-17 11:54:18.000000000 +0000
|+++ backend/pixma/pixma_bjnp.c
--------------------------
Patching file backend/pixma/pixma_bjnp.c using Plan A...
Hunk #1 succeeded at 2027.
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-m4_byteorder.m4
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-m4_byteorder.m4
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-m4_byteorder.m4,v 1.2 2022/01/04 16:04:40 triaxx Exp $
|
|Add SunOS byteorder needs.
|
|--- m4/byteorder.m4.orig	2013-02-23 02:00:56.000000000 +0000
|+++ m4/byteorder.m4
--------------------------
Patching file m4/byteorder.m4 using Plan A...
Hunk #1 succeeded at 110.
Hunk #2 succeeded at 208.
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-tools_umax__pp.c
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/graphics/sane-backends/patches/patch-tools_umax__pp.c
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-tools_umax__pp.c,v 1.1 2018/01/31 10:43:03 jperkin Exp $
|
|Set _XOPEN_SOURCE correctly.
|
|--- tools/umax_pp.c.orig	2013-02-23 02:00:56.000000000 +0000
|+++ tools/umax_pp.c
--------------------------
Patching file tools/umax_pp.c using Plan A...
Hunk #1 succeeded at 6.
done
===> Creating toolchain wrappers for sane-backends-1.3.1nb7
===> Configuring for sane-backends-1.3.1nb7
=> Modifying GNU configure scripts to avoid --recheck
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Replacing install-sh with pkgsrc version
=> Fixing locale directory references.
=> Checking for portability problems in extracted files
checking for a BSD-compatible install... /opt/pkg/bin/bsdinstall -c -o pbulk -g pbulk
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... /usr/bin/nawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for x86_64-sun-solaris2.11-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether /opt/pkg/bin/python3.12 version is >= 2.7... yes
checking for /opt/pkg/bin/python3.12 version... 3.12
checking for /opt/pkg/bin/python3.12 platform... sunos5
checking for /opt/pkg/bin/python3.12 script directory... ${prefix}/lib/python3.12/site-packages
checking for /opt/pkg/bin/python3.12 extension module directory... ${exec_prefix}/lib/python3.12/site-packages
checking for gcc option to accept ISO C99... none needed
checking for gcc option for ISO C99 w/o extensions... 
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... (cached) /usr/xpg4/bin/grep
checking for egrep... (cached) /usr/xpg4/bin/grep -E
checking whether gcc needs -traditional... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for x86_64-sun-solaris2.11-ar... no
checking for x86_64-sun-solaris2.11-lib... no
checking for x86_64-sun-solaris2.11-link... no
checking for ar... ar
checking the archiver (ar) interface... ar
checking build system type... x86_64-sun-solaris2.11
checking host system type... x86_64-sun-solaris2.11
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/xpg4/bin/grep -F
checking for ld used by gcc... /bin/ld
checking if the linker (/bin/ld) is GNU ld... no
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -p
checking the name lister (/usr/bin/nm -p) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 786240
checking how to convert x86_64-sun-solaris2.11 file names to x86_64-sun-solaris2.11 format... func_convert_file_noop
checking how to convert x86_64-sun-solaris2.11 file names to toolchain format... func_convert_file_noop
checking for /bin/ld option to reload object files... -r
checking for x86_64-sun-solaris2.11-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-sun-solaris2.11-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-sun-solaris2.11-ar... ar
checking for archiver @FILE support... no
checking for x86_64-sun-solaris2.11-strip... no
checking for strip... strip
checking for x86_64-sun-solaris2.11-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -p output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-sun-solaris2.11-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... rm: conftest*: No such file or directory
yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/bin/ld -64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... rm: conftest*: No such file or directory
no
checking dynamic linker characteristics... solaris2.11 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /bin/ld -64
checking if the linker (/bin/ld -64) is GNU ld... no
checking whether the g++ linker (/bin/ld -64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... rm: conftest*: No such file or directory
yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/bin/ld -64) supports shared libraries... yes
checking dynamic linker characteristics... solaris2.11 ld.so
checking how to hardcode library paths into programs... immediate
checking whether NLS is requested... yes
checking for msgfmt... /home/pbulk/build/graphics/sane-backends/work/.tools/bin/msgfmt
checking for gmsgfmt... /home/pbulk/build/graphics/sane-backends/work/.tools/bin/msgfmt
checking for xgettext... /opt/pkg/bin/xgettext
checking for msgmerge... /home/pbulk/build/graphics/sane-backends/work/.tools/bin/msgmerge
checking for ld used by gcc... /bin/ld -64
checking if the linker (/bin/ld -64) is GNU ld... no
checking for shared library run path origin... done
checking for 64-bit host... yes
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for sane-config... no
checking pkg-config is at least version 0.9.0... yes
checking whether g++ supports C++11 features with -std=c++11... yes
checking for library containing strerror... none required
checking whether byte ordering is bigendian... no
checking for le32toh in machine/endian.h... no
checking for ntohl in arpa/inet.h... yes
checking for swap32 in machine/endian.h... no
checking for bswap_32 in byteswap.h... no
checking for BSWAP_32 in sys/byteorder.h... yes
checking for stdint types... stdint.h (shortcircuit)
make use of stdint.h in include/_stdint.h (assuming C99 compatible system)
checking for dlfcn.h... (cached) yes
checking for dlopen in -ldl... yes
checking for dlopen... yes
checking dl.h usability... no
checking dl.h presence... no
checking for dl.h... no
checking for sqrt in -lm... yes
checking for jpeg_start_decompress in -ljpeg... yes
checking jconfig.h usability... yes
checking jconfig.h presence... yes
checking for jconfig.h... yes
checking for jpeglib - version >= 61 (6a)... yes
checking for TIFFFdOpen in -ltiff... yes
checking tiffio.h usability... yes
checking tiffio.h presence... yes
checking for tiffio.h... yes
checking for png_init_io in -lpng... no
checking ieee1284.h usability... no
checking ieee1284.h presence... no
checking for ieee1284.h... no
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_create in -lpthread... yes
checking for pthread_create... yes
checking for pthread_kill... yes
checking for pthread_join... yes
checking for pthread_detach... yes
checking for pthread_cancel... yes
checking for pthread_testcancel... yes
checking whether pthread_t is integer... yes
checking whether to enable pthread support... yes
checking whether to use pthread instead of fork... yes
checking whether to enable device locking... yes
checking for libv4l1 >= 0.8.3... no
checking for avahi-client >= 0.6.24... no
checking for sane_init in -lsane... no
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for unistd.h... (cached) yes
checking libc.h usability... no
checking libc.h presence... no
checking for libc.h... no
checking sys/dsreq.h usability... no
checking sys/dsreq.h presence... no
checking for sys/dsreq.h... no
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/shm.h usability... yes
checking sys/shm.h presence... yes
checking for sys/shm.h... yes
checking sys/ipc.h usability... yes
checking sys/ipc.h presence... yes
checking for sys/ipc.h... yes
checking sys/scanio.h usability... no
checking sys/scanio.h presence... no
checking for sys/scanio.h... no
checking os2.h usability... no
checking os2.h presence... no
checking for os2.h... no
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/io.h usability... no
checking sys/io.h presence... no
checking for sys/io.h... no
checking sys/hw.h usability... no
checking sys/hw.h presence... no
checking for sys/hw.h... no
checking for sys/types.h... (cached) yes
checking linux/ppdev.h usability... no
checking linux/ppdev.h presence... no
checking for linux/ppdev.h... no
checking dev/ppbus/ppi.h usability... no
checking dev/ppbus/ppi.h presence... no
checking for dev/ppbus/ppi.h... no
checking machine/cpufunc.h usability... no
checking machine/cpufunc.h presence... no
checking for machine/cpufunc.h... no
checking sys/sem.h usability... yes
checking sys/sem.h presence... yes
checking for sys/sem.h... yes
checking poll.h usability... yes
checking poll.h presence... yes
checking for poll.h... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking be/kernel/OS.h usability... no
checking be/kernel/OS.h presence... no
checking for be/kernel/OS.h... no
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking asm/types.h usability... no
checking asm/types.h presence... no
checking for asm/types.h... no
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for tiffio.h... (cached) yes
checking ifaddrs.h usability... yes
checking ifaddrs.h presence... yes
checking for ifaddrs.h... yes
checking pwd.h usability... yes
checking pwd.h presence... yes
checking for pwd.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking for asm/io.h... no
checking winsock2.h usability... no
checking winsock2.h presence... no
checking for winsock2.h... no
checking resmgr.h usability... no
checking resmgr.h presence... no
checking for resmgr.h... no
checking for size_t... yes
checking for pid_t... yes
checking for ssize_t... yes
checking for u_char... yes
checking for u_short... yes
checking for u_int... yes
checking for u_long... yes
checking for long long support... yes
checking for socklen_t in <sys/socket.h>... yes
checking for union semun in <sys/sem.h>... no
checking for struct flock in fcntl.h... yes
checking for Linux ioctl defines... no
checking whether byte ordering is bigendian... (cached) no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for working alloca.h... yes
checking for alloca... yes
checking for getenv... yes
checking for inet_ntop... (cached) yes
checking for inet_pton... (cached) yes
checking for sigprocmask... yes
checking for sleep... yes
checking for snprintf... yes
checking for strcasestr... yes
checking for strdup... yes
checking for strndup... yes
checking for strsep... yes
checking for syslog... yes
checking for usleep... yes
checking for vsyslog... yes
checking for gethostbyaddr... yes
checking for gethostbyaddr... (cached) yes
checking for socket... yes
checking for inet_aton... yes
checking for inet_addr... yes
checking for inet_aton... (cached) yes
checking for inet_ntoa... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for atexit... yes
checking for ioperm... no
checking for i386_set_ioperm... no
checking for mkdir... yes
checking for strftime... yes
checking for strstr... yes
checking for strtod... yes
checking for cfmakeraw... no
checking for tcsendbreak... yes
checking for strcasecmp... yes
checking for strncasecmp... yes
checking for _portaccess... no
checking for getaddrinfo... yes
checking for getnameinfo... yes
checking for poll... yes
checking for setitimer... yes
checking for iopl... no
checking for getuid... yes
checking for getpass... yes
checking for getopt_long... yes
checking for libsystemd... no
checking for libsystemd-daemon... no
checking for libusb-1.0... yes
checking for libcurl... no
checking for poppler-glib... no
checking for libxml-2.0... yes
checking IOKit/scsi/SCSITaskLib.h usability... no
checking IOKit/scsi/SCSITaskLib.h presence... no
checking for IOKit/scsi/SCSITaskLib.h... no
checking IOKit/cdb/IOSCSILib.h usability... no
checking IOKit/cdb/IOSCSILib.h presence... no
checking for IOKit/cdb/IOSCSILib.h... no
checking IOKit/scsi/SCSICommandOperationCodes.h usability... no
checking IOKit/scsi/SCSICommandOperationCodes.h presence... no
checking for IOKit/scsi/SCSICommandOperationCodes.h... no
checking IOKit/scsi-commands/SCSICommandOperationCodes.h usability... no
checking IOKit/scsi-commands/SCSICommandOperationCodes.h presence... no
checking for IOKit/scsi-commands/SCSICommandOperationCodes.h... no
checking scsi.h usability... no
checking scsi.h presence... no
checking for scsi.h... no
checking sys/scsi.h usability... no
checking sys/scsi.h presence... no
checking for sys/scsi.h... no
checking sys/scsicmd.h usability... no
checking sys/scsicmd.h presence... no
checking for sys/scsicmd.h... no
checking sys/scsiio.h usability... no
checking sys/scsiio.h presence... no
checking for sys/scsiio.h... no
checking bsd/dev/scsireg.h usability... no
checking bsd/dev/scsireg.h presence... no
checking for bsd/dev/scsireg.h... no
checking scsi/sg.h usability... no
checking scsi/sg.h presence... no
checking for scsi/sg.h... no
checking camlib.h usability... no
checking camlib.h presence... no
checking for camlib.h... no
checking gscdds.h usability... no
checking gscdds.h presence... no
checking for gscdds.h... no
checking sys/scsi/scsi.h usability... yes
checking sys/scsi/scsi.h presence... yes
checking for sys/scsi/scsi.h... yes
checking sys/scsi/sgdefs.h usability... no
checking sys/scsi/sgdefs.h presence... no
checking for sys/scsi/sgdefs.h... no
checking sys/scsi/targets/scgio.h usability... no
checking sys/scsi/targets/scgio.h presence... no
checking for sys/scsi/targets/scgio.h... no
checking apollo/scsi.h usability... no
checking apollo/scsi.h presence... no
checking for apollo/scsi.h... no
checking sys/sdi_comm.h usability... no
checking sys/sdi_comm.h presence... no
checking for sys/sdi_comm.h... no
checking sys/passthrudef.h usability... no
checking sys/passthrudef.h presence... no
checking for sys/passthrudef.h... no
checking for io/cam/cam.h... no
checking for ntddscsi.h... no
checking for ddk/ntddscsi.h... no
checking for scsireq_enter in -lscsi... no
checking for cam_open_device in -lcam... no
checking for scsireq_enter... no
scsi buffersize: 131072
checking whether to enable IPv6... yes
checking whether struct sockaddr_storage has an ss_family member... yes
checking for jpeg_crop_scanline... yes
checking for jpeg_skip_scanlines... yes
*** canon_pp backend requires libieee1284 library - disabling
*** escl backend requires AVAHI library - disabling
*** escl backend requires cURL library - disabling
*** gphoto2 backend requires gphoto2 and JPEG libraries - disabling
*** hpsj5s backend requires libieee1284 library - disabling
*** mustek_pp backend requires libieee1284 or parport-directio libraries - disabling
*** pint backend requires sys/scanio.h - disabling
*** qcam backend requires (ioperm, inb and outb) or portaccess functions - disabling
*** v4l backend requires v4l libraries - disabling
*** pnm backend not manually selected - disabling
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating lib/Makefile
config.status: creating sanei/Makefile
config.status: creating frontend/Makefile
config.status: creating japi/Makefile
config.status: creating backend/Makefile
config.status: creating include/Makefile
config.status: creating doc/Makefile
config.status: creating po/Makefile.in
config.status: creating testsuite/Makefile
config.status: creating testsuite/backend/Makefile
config.status: creating testsuite/backend/genesys/Makefile
config.status: creating testsuite/sanei/Makefile
config.status: creating testsuite/tools/Makefile
config.status: creating tools/Makefile
config.status: creating doc/doxygen-sanei.conf
config.status: creating doc/doxygen-genesys.conf
config.status: creating tools/sane-config
config.status: creating tools/sane-backends.pc
config.status: creating include/sane/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
rm: libtoolT: No such file or directory
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing include/_stdint.h commands
config.status: creating include/_stdint.h : _SANE_BACKENDS_INCLUDE__STDINT_H
-> Variables used for compilation/linking:
AM_CPPFLAGS=" -D_REENTRANT -DPATH_SANE_CONFIG_DIR=$(configdir) -DPATH_SANE_DATA_DIR=$(datadir) -DPATH_SANE_LOCK_DIR=$(locksanedir) -DV_MAJOR=1 -DV_MINOR=3"
AM_CFLAGS=" -Wall"
AM_CXXFLAGS=" -Wall"
AM_LDFLAGS=""
LIBS="-lresolv -lnsl -lsocket"
-> Installation directories:
Configuration: /etc/opt/pkg
Libraries:     /opt/pkg/lib
Binaries:      /opt/pkg/bin and /opt/pkg/sbin
Manpages:      /opt/pkg/share/man
Documentation: /opt/pkg/share/doc/sane-backends
Lockfiles:     /opt/pkg/var/lock
-> Network parameters:
Build saned:   yes
IPv6 support:  yes
Avahi support: no
cURL support:  no
POPPLER_GLIB support:  no
SNMP support:  no
-> The following backends will be built:
abaton agfafocus apple artec artec_eplus48u as6e avision bh canon canon630u canon_dr canon_lide70 cardscan coolscan coolscan2 coolscan3 dc25 dc210 dc240 dell1600n_net dmc epjitsu epson epson2 epsonds fujitsu genesys gt68xx hp hp3500 hp3900 hp4200 hp5400 hp5590 hpljm1005 hs2p ibm kodak kodakaio kvs1025 kvs20xx kvs40xx leo lexmark lexmark_x2600 ma1509 magicolor matsushita microtek microtek2 mustek mustek_usb mustek_usb2 nec net niash pie pieusb pixma plustek plustek_pp ricoh ricoh2 rts8891 s9036 sceptre sharp sm3600 sm3840 snapscan sp15c st400 stv680 tamarack teco1 teco2 teco3 test u12 umax umax_pp umax1220u xerox_mfp p5 

-> The following preload backends will be built:

****************************************************************
* Please be sure to read file PROBLEMS in this directory       *
* BEFORE running any of the SANE applications.  Some devices   *
* may be damaged by improper operation, so please do heed this *
* advice.                                                      *
****************************************************************
=> Modifying libtool scripts to use pkgsrc libtool
=> Modifying libtool scripts to use pkgsrc depcomp