+ case "${usergroup_phase}" in + local run_cmd + run_cmd=run_su + shift + run_su /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent PYTHON_VERSION_REQD=312 WRKLOG=/tmp/bulklog/cross-arm-none-eabi-gdb-16.3/work.log + su pbulk -c '"$@"' make /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent PYTHON_VERSION_REQD=312 WRKLOG=/tmp/bulklog/cross-arm-none-eabi-gdb-16.3/work.log => Checksum BLAKE2s OK for gdb-16.3.tar.xz => Checksum SHA512 OK for gdb-16.3.tar.xz ===> Installing dependencies for cross-arm-none-eabi-gdb-16.3 ========================================================================== The supported build options for cross-arm-none-eabi-gdb are: python The currently selected options are: python You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.gdb (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, cross-arm-none-eabi-gdb-16.3. Their current value is shown below: * PYTHON_VERSION_DEFAULT = 312 Based on these variables, the following variables have been set: * PYPACKAGE = python312 You may want to abort the process now with CTRL-C and change the value of variables in the first group before continuing. Be sure to run `/opt/pkg/bin/bmake clean' after the changes. ========================================================================== => Tool dependency gmake>=3.81: found gmake-4.4.1 => Tool dependency gtexinfo>=3.12: found gtexinfo-7.2nb1 => Tool dependency cwrappers>=20150314: found cwrappers-20220403 => Tool dependency checkperms>=1.1: found checkperms-1.12 => Full dependency pkg_install-info-[0-9]*: found pkg_install-info-4.5nb3 => Full dependency gmp>=5.0.1: found gmp-6.3.0 => Full dependency mpfr>=4.0.0: found mpfr-4.2.1 => Full dependency ncurses>=6.5: found ncurses-6.5nb1 => Full dependency python312>=3.12.0: found python312-3.12.11 => Full dependency gettext-lib>=0.22: found gettext-lib-0.22.5 => Full dependency libiconv>=1.9.1: found libiconv-1.17nb1 ===> Overriding tools for cross-arm-none-eabi-gdb-16.3 ===> Extracting for cross-arm-none-eabi-gdb-16.3 ===> Patching for cross-arm-none-eabi-gdb-16.3 ===> Creating toolchain wrappers for cross-arm-none-eabi-gdb-16.3 ===> Configuring for cross-arm-none-eabi-gdb-16.3 => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Checking for portability problems in extracted files configure: WARNING: unrecognized options: --disable-nls, --with-python, --with-libiconv-prefix checking build system type... x86_64-sun-solaris2.11 checking host system type... x86_64-sun-solaris2.11 checking target system type... arm-none-eabi checking for a BSD-compatible install... /opt/pkg/bin/bsdinstall -c -o pbulk -g pbulk checking whether ln works... yes checking whether ln -s works... yes checking for a sed that does not truncate output... /usr/bin/sed checking for gawk... /usr/bin/nawk checking for gdbserver support... no checking for x86_64-sun-solaris2.11-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for gcc option to accept ISO C99... none needed checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking whether g++ accepts -static-libstdc++ -static-libgcc... yes checking for x86_64-sun-solaris2.11-gnatbind... no checking for gnatbind... no checking for x86_64-sun-solaris2.11-gnatmake... no checking for gnatmake... no checking whether compiler driver understands Ada and is recent enough... no checking for x86_64-sun-solaris2.11-gdc... no checking for gdc... no checking whether the D compiler works... no checking for cargo... no checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2 checking for objdir... .libs checking for the correct version of gmp.h... yes checking for the correct version of mpfr.h... yes checking for the correct version of the gmp/mpfr libraries... yes checking for isl 0.15 or later... no required isl version is 0.15 or later checking whether to enable libdiagnostics... no checking for library containing dlopen... none required checking for library containing pthread_create... none required *** This configuration is not supported in the following subdirectories: gdbserver sim (Any other directories should still work fine.) checking for default BUILD_CONFIG... checking for --enable-vtable-verify... no checking for bison... no checking for byacc... no checking for yacc... yacc checking for bison... no checking for gm4... gm4 checking for flex... flex checking for flex... flex checking for makeinfo... /home/pbulk/build/cross/arm-none-eabi-gdb/work/.tools/bin/makeinfo checking for expect... no checking for runtest... no checking for x86_64-sun-solaris2.11-ar... no checking for ar... ar checking for x86_64-sun-solaris2.11-as... no checking for as... as checking for x86_64-sun-solaris2.11-dlltool... no checking for dlltool... no checking for x86_64-sun-solaris2.11-dsymutil... no checking for dsymutil... no checking for ld... (cached) /bin/ld checking for x86_64-sun-solaris2.11-ld... (cached) /bin/ld checking for x86_64-sun-solaris2.11-lipo... no checking for lipo... no checking for x86_64-sun-solaris2.11-nm... no checking for nm... nm checking for x86_64-sun-solaris2.11-ranlib... no checking for ranlib... ranlib checking for x86_64-sun-solaris2.11-strip... no checking for strip... strip checking for x86_64-sun-solaris2.11-windres... no checking for windres... no checking for x86_64-sun-solaris2.11-windmc... no checking for windmc... no checking for x86_64-sun-solaris2.11-objcopy... no checking for objcopy... objcopy checking for x86_64-sun-solaris2.11-objdump... no checking for objdump... objdump checking for x86_64-sun-solaris2.11-otool... no checking for otool... no checking for x86_64-sun-solaris2.11-readelf... no checking for readelf... readelf checking for -plugin option... checking for x86_64-sun-solaris2.11-ar... (cached) ar ar: bad option: -- usage: ar -d[-SvV] archive file ... ar -m[-abiSvV] [posname] archive file ... ar -p[-vV][-sS] archive [file ...] ar -q[-csuvSV] [file ...] ar -r[-cuvSV] [-abi] [posname] [file ...] ar -s[-vV] archive ar -t[-vV][-sS] archive [file ...] ar -x[-vV][-sSCT] archive [file ...] configure: WARNING: Failed: ar --plugin /opt/tools/gcc14/libexec/gcc/x86_64-sun-solaris2.11/14.3.0/liblto_plugin.so rc no checking for arm-none-eabi-cc... no checking for arm-none-eabi-gcc... no checking for arm-none-eabi-c++... no checking for arm-none-eabi-g++... no checking for arm-none-eabi-cxx... no checking for arm-none-eabi-gxx... no checking for arm-none-eabi-gcc... no checking for arm-none-eabi-gfortran... no checking for arm-none-eabi-gccgo... no checking for arm-none-eabi-gdc... no checking for arm-none-eabi-gm2... no checking for arm-none-eabi-ar... no checking for arm-none-eabi-as... no checking for arm-none-eabi-dlltool... no checking for arm-none-eabi-dsymutil... no checking for arm-none-eabi-ld... no checking for arm-none-eabi-lipo... no checking for arm-none-eabi-nm... no checking for arm-none-eabi-objcopy... no checking for arm-none-eabi-objdump... no checking for arm-none-eabi-otool... no checking for arm-none-eabi-ranlib... no checking for arm-none-eabi-readelf... no checking for arm-none-eabi-strip... no checking for arm-none-eabi-windres... no checking for arm-none-eabi-windmc... no checking where to find the target ar... pre-installed checking where to find the target as... pre-installed checking where to find the target cc... pre-installed checking where to find the target c++... pre-installed checking where to find the target c++ for libstdc++... pre-installed checking where to find the target dlltool... pre-installed checking where to find the target dsymutil... pre-installed checking where to find the target gcc... pre-installed checking where to find the target gfortran... pre-installed checking where to find the target gccgo... pre-installed checking where to find the target gdc... pre-installed checking where to find the target gm2... pre-installed checking where to find the target ld... pre-installed checking where to find the target lipo... pre-installed checking where to find the target nm... pre-installed checking where to find the target objcopy... pre-installed checking where to find the target objdump... pre-installed checking where to find the target otool... pre-installed checking where to find the target ranlib... pre-installed checking where to find the target readelf... pre-installed checking where to find the target strip... pre-installed checking where to find the target windres... pre-installed checking where to find the target windmc... pre-installed checking whether to enable maintainer-specific portions of Makefiles... no configure: creating ./config.status config.status: creating Makefile configure: WARNING: unrecognized options: --disable-nls, --with-python, --with-libiconv-prefix